Anyone installed a landing light flasher?

I like the visibility of the flashing landing light...they really get your
attention. The Pulsar unit sold by Spruce for about $320 (single light,
mosfet, variable speed) is the only one I've seen advertised. They say 30
minute install for an under panel mount. They also say you simply need to
put two wires onto the landing light switch (the third wire goes I don't
remember where). I can't imagine doing anything at the switch pane in an
Archer would be easy.

Has anyone installed one?
--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel

We wrote up one in a Kitplanes article several years ago. We also (as I
vaguely remember) offered to sell the parts for our cost ($15 or so), kitted
up a dozen of them, but didn't get any takers. One of them is yours for a
SASE.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
I like the visibility of the flashing landing light...they really get your
attention. The Pulsar unit sold by Spruce for about $320 (single light,
mosfet, variable speed) is the only one I've seen advertised. They say 30
minute install for an under panel mount. They also say you simply need to
put two wires onto the landing light switch (the third wire goes I don't
remember where). I can't imagine doing anything at the switch pane in an
Archer would be easy.

Has anyone installed one?
--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel

Thanks Jim. What mailing address?

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"RST Engineering" wrote in message
m...
We wrote up one in a Kitplanes article several years ago. We also (as I
vaguely remember) offered to sell the parts for our cost ($15 or so),
kitted up a dozen of them, but didn't get any takers. One of them is
yours for a SASE.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
I like the visibility of the flashing landing light...they really get your
attention. The Pulsar unit sold by Spruce for about $320 (single light,
mosfet, variable speed) is the only one I've seen advertised. They say
30
minute install for an under panel mount. They also say you simply need
to
put two wires onto the landing light switch (the third wire goes I don't
remember where). I can't imagine doing anything at the switch pane in an
Archer would be easy.

Has anyone installed one?
--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel

www.rstengineering.com and then to "Contact Us".

www.rstengineering.com/kitplanes has the construction details and schematic
in one of the articles on this page.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
Thanks Jim. What mailing address?

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"RST Engineering" wrote in message
m...
We wrote up one in a Kitplanes article several years ago. We also (as I
vaguely remember) offered to sell the parts for our cost ($15 or so),
kitted up a dozen of them, but didn't get any takers. One of them is
yours for a SASE.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
I like the visibility of the flashing landing light...they really get
your
attention. The Pulsar unit sold by Spruce for about $320 (single light,
mosfet, variable speed) is the only one I've seen advertised. They say
30
minute install for an under panel mount. They also say you simply need
to
put two wires onto the landing light switch (the third wire goes I don't
remember where). I can't imagine doing anything at the switch pane in
an
Archer would be easy.

Has anyone installed one?
--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel

RST Engineering wrote:
We wrote up one in a Kitplanes article several years ago. We also (as I
vaguely remember) offered to sell the parts for our cost ($15 or so), kitted
up a dozen of them, but didn't get any takers. One of them is yours for a
SASE.

Jim

SPAM! Take it to r.a.marketplace, Jim. Trying to unload your useless
castoffs doesn't qualify as as "owner" assistance.

RST Engineering wrote:
www.rstengineering.com and then to "Contact Us".

www.rstengineering.com/kitplanes has the construction details and schematic
in one of the articles on this page.

Jim

SPAM! Take it to r.a.marketplace, Jim. Trying to unload your useless
castoffs doesn't qualify as as "owner" assistance.

Your a gem, Jim. The SASE is on it's way...

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"RST Engineering" wrote in message
m...
www.rstengineering.com and then to "Contact Us".

www.rstengineering.com/kitplanes has the construction details and
schematic in one of the articles on this page.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
Thanks Jim. What mailing address?

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"RST Engineering" wrote in message
m...
We wrote up one in a Kitplanes article several years ago. We also (as I
vaguely remember) offered to sell the parts for our cost ($15 or so),
kitted up a dozen of them, but didn't get any takers. One of them is
yours for a SASE.

Jim

--
"It is the mark of an educated mind to be able to entertain a thought
without accepting it."
--Aristotle


"Mike Noel" wrote in message
...
I like the visibility of the flashing landing light...they really get
your
attention. The Pulsar unit sold by Spruce for about $320 (single
light,
mosfet, variable speed) is the only one I've seen advertised. They say
30
minute install for an under panel mount. They also say you simply need
to
put two wires onto the landing light switch (the third wire goes I
don't
remember where). I can't imagine doing anything at the switch pane in
an
Archer would be easy.

Has anyone installed one?
--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel

I added the sender immediately to my block list. There are too many other
things to worry about these days to give such comments serious
consideration.

--
Best Regards,
Mike.

http://flickr.com/photos/mikenoel/

http://photoshow.comcast.net/mikenoel


"Morgans" wrote in message
...
SPAM! Take it to r.a.marketplace, Jim. Trying to unload your useless
castoffs doesn't qualify as as "owner" assistance.

Hey, gang. Don't be nice to anyone else around here. You could be
accused of spamming the group.

If that was spam, bring it on.
--
Jim in NC

"Rip" wrote

SPAM! Take it to r.a.marketplace, Jim. Trying to unload your useless
castoffs doesn't qualify as as "owner" assistance.

Gag!

Man, give it a rest. Jim is doing something nice, and you want to jump him?

Sheesh. Listen to yourself, for just a minute. You should be ashamed.
--
Jim in NC

SPAM! Take it to r.a.marketplace, Jim. Trying to unload your useless
castoffs doesn't qualify as as "owner" assistance.

Hey, gang. Don't be nice to anyone else around here. You could be accused
of spamming the group.

If that was spam, bring it on.
--
Jim in NC