Repainting Wingtip

On Thursday, November 23, 2017 at 9:42:56 AM UTC-5, K m wrote:
On Monday, November 20, 2017 at 4:15:07 PM UTC-7, Michael Opitz wrote:
At 04:34 20 November 2017, wrote:

Finding lacquer in a rattle can is not that easy unless you go to an
auto parts store like Advanced Auto or Autozone. They sell the
Duplicolor ..................
The Simtec/Prestec process is also good, but I think you'll have to
buy at least a quart which (with shipping) is not cheap. It's a 2 part
epoxy.............

The Duplicolor is cheap, Low grade garbage made by Rustoleum. Much better to take an access panel in to a Auto Body supply shop and match some paint which can be put into a rattle can.
Also, Simtec is Polyester.

He was talking about a wing tip.
If it is a patch and spray job Rustoleum would do just fine. Don't worry about perfect match, just mask and spray the whole tip.
UH

Mask and spray both tips and it's a perfect match all around!

On 11/23/2017 8:08 AM, wrote:

He was talking about a wing tip.
If it is a patch and spray job Rustoleum would do just fine. Don't worry about perfect match, just mask and spray the whole tip.
UH

--
Dan, 5J