|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
August 7th 19, 06:34 PM
posted to rec.aviation.soaring
|
|||
|
|||
Ogar parts source
We need a source for the tail wheel control cable for a 1977 SZD-45A Ogar glider.
Urgent! Please respond soon. Contact Erin OR Joanie Smiling Aviation Delta, CO 970-874-5181 
|
|
#2
August 7th 19, 10:04 PM
posted to rec.aviation.soaring
|
|||
|
|||
|
Ogar parts source
Have you check with an A&P who has Nico-press tool, correct cable and sleeves? Replacing worn or broken cables is a common thing for most any A&P mechanic.
He/she will know how to proof load replacement cable, if that is necessary/required. JJ
|
|
#3
August 7th 19, 10:08 PM
posted to rec.aviation.soaring
|
|||
|
|||
|
Ogar parts source
On Wednesday, August 7, 2019 at 10:34:57 AM UTC-7, Erin Quilter wrote:
We need a source for the tail wheel control cable for a 1977 SZD-45A Ogar glider... Your best bet is to carefully measure the existing cable assembly and have it replicated by Aircraft Spruce or McFarlane. Typically you'll have one end finished and the other raw, and use field-installable terminations such as nicopress fittings to finish off the cable once you've fished it through all the pulleys, guides, fairleads, and etc. Contact me off-forum if you'd like specific guidance about the process. Thanks, Bob K. bob at hpaircraft dot com
|
|
#4
August 8th 19, 06:18 PM
posted to rec.aviation.soaring
|
|||
|
|||
|
Ogar parts source
On Wednesday, August 7, 2019 at 11:34:57 AM UTC-6, Erin Quilter wrote:
We need a source for the tail wheel control cable for a 1977 SZD-45A Ogar glider. Urgent! Please respond soon. Contact Erin OR Joanie Smiling Aviation Delta, CO 970-874-5181 I have a Ogar interested in contacting you Geoff.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone know of a source for Blanik L-13 parts? | [email protected] | Soaring | 2 | April 2nd 09 07:55 PM |
| Parts source for 1-26 | Roger Kelly | Soaring | 2 | April 27th 05 04:05 PM |
| Source of Piper Parts | Mike Noel | Owning | 2 | June 25th 04 09:04 PM |
| Wanted: Mini-500 spare parts source | Mr.Twistair | Home Built | 4 | January 24th 04 12:29 AM |
| Wanted: Mini-500 spare parts source | Mr.Twistair | Rotorcraft | 4 | January 24th 04 12:29 AM |
Linear Mode
