Removing old antennas

Kage,

I do agree with you about it being ignored. Alot of pilots/owners are
not aware of this loophole. In fact, AOPA I believe,or maybe it was
Aircraft technician, Did an article on this very same subject. What
gets most people is that the equipment was deactivated and every thing
is fine but they fail to make a logbook entry noting the deactivated
equipment was in fact inspected.

As for your comments infering that because an A&P works on A Piper
Arrow, he is a shade tree mechanic....well it's just an assholic
comment.I have seen outstanding single engine mechanics.

By the way, I have been working on GII, GIII, GIV for about 20 yrs.
Have done engine changes, 72 month inspections..just about
everything....And Yes, I have left SAV. with properly deactivated
equip....

Joe





"kage" wrote in message ...
Dream on mamma,

Say what you want. Like I said, it is generally ignored by shade tree
mechanics working on Piper Arrows. But if you bring your Gulfstream into a
legitimate shop your inoperative equipment WILL be repaired, replaced,
removed or required inspections performed and the equipment returned to
service.


inspected"joe mamma" wrote in message
om...
"kage" wrote in message
...
"Jay Honeck" wrote in message


Jay,

You have no choice. You are REQUIRED to remove inoperative equipment.
Part
91.405 (c).

Best,
Karl.

BTW, the reg says the equipment must be repaired, replaced, removed or
inspected at the next required inspection. What they mean by "inspected"
is
if a required inspection is due. Not just the mechanic peering at a
piece of
inop equipment and letting it go for another year! This rule is
regularily
ignored by the GA community. But it would never fly at a reputable
repair
facility. Once the antennas are removed you will have to revise the
equipment list and weight and balance.

WRONG!!!!!
91.405(c)
each owner operator blah blah blah (c)shall have any inoperative
instrument or item of equipment permitted to be blah blah blah.
Inspected means. You have that piece of equipment inspected to be
sure it is still deactivated.

For an example: Say I have a Piper Arrow with inop air conditioning.
I can deactivate and placard that system. Never have it fixed. As long
as. At the next required inspection.(IE 100 hr or annual), I inspect
it to make sure it is still deactivated and placarded AND Make a
logbook entry of such.

Good to go till next inspection....

Joe A&P/IA