![]()  | 
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. | 
		
			
  | 	
	
	
		
		|||||||
| 
		 | 
	Thread Tools | Display Modes | 
| 
		 
			 
			#13  
			 
            
			
			
			
		 
		
		
	 | 
|||
		
		
  | 
|||
| 
	
	
		
			
			 
Richard Kaplan wrote: 
		
	
		
		
		
		
		
	
		 
		
	
	
	A vacuum faliure with a gradual spooldown of the AI and DG at vary rates is a subtle process, very different from having an instructor suddenly cover up a gyro. You are correct that there is enough redundancy in a typical GA plane to FLY partial panel; the problem is that there is not enough information for most pilots to IDENTIFY a partial panel situation before the situation has become critical. Richard, There seem to be a number of instances where the pilot was aware of the problem -- had described it to ATC and possibly requested some form of assistance -- had been flying the plane for some time more or less under control, and then lost it. So the pilot did identify a partial panel situation before it became critical, he simply couldn't FLY partial panel. The accident Julian posted the link for more-or-less seems to fall into this case, as did a couple of local accidents. Cheers, Sydney  | 
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  | 
			 
			Similar Threads
		 | 
	||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| Good AI backup, wish me luck | Robert M. Gary | Instrument Flight Rules | 29 | March 1st 04 06:36 PM | 
| Solid State Backup AI | Dan Truesdell | Instrument Flight Rules | 20 | January 15th 04 10:53 PM | 
| Gyros - which do you trust? | Julian Scarfe | Instrument Flight Rules | 6 | July 27th 03 10:36 AM | 
| Backup gyros - which do you trust? | Dan Luke | Owning | 46 | July 17th 03 09:06 PM | 
| Backup gyros - which do you trust? | Dan Luke | Piloting | 23 | July 17th 03 09:06 PM |