Help me clear up my brain fart

"Roger Long" om wrote in
message ...
[...] You should always be dividing your attention between inside
and outside.

IMHO, not even close. Not for VFR flight.

The airplane is perfectly flyable without ANY reference to the instruments,
or anything inside the airplane. Turning base to final is no time to be
wasting ANY effort looking at instruments, and is certainly no time to be
attempting to use the instruments as feedback for control inputs.

A pilot who cannot judge bank angle and coordination without consulting the
turn coordinator and attitude indicator is one who needs to get back to the
basics.

What happens to low hours, and even high hours pilots when they are
stressed, is fixating on the view outside the plane and pushing the plane
into a stall spin trying to turn too tightly back to the runway
centerline.

They only do that if they fail to keep the airplane coordinated. One does
not need to consult the instrument panel in order to keep the airplane
coordinated.

[...] Pilots, especially students, should be checking airspeed, etc. all
through
the pattern.

Again, not necessary at all. It's all well and good to keep an eye on
things, of course. But any pilot should be able to go extended periods of
time in the pattern without looking at the ASI or any other instrument.
Airspeed in particular should be second-nature. Pitch and power will result
in the desired airspeed, and a pilot familiar with the airplane knows what
pitch and power to set in the pattern. Additionally, aircraft noise and
control feel gives you reasonably good information about airspeed (within
five knots or so).

I check my airspeed indicator maybe a couple of times before turning final,
and then maybe two or three more times while flying final, assuming
everything else is going fine. It's certainly not a significant part of my
visual scan. The vast majority of my visual scan is devoted to looking
outside the airplane.

Pete