Diesel engine

On Sun, 25 Apr 2004, Pete Schaefer wrote:

I've watched the Mazda B13 thing closely over the last couple of years.
There are some interesting possibilities there, but none of the good options
look very cheap.

I think mine is a good option, and it is cheap. My 13b has flown over
400 hours in the last five years, and cost less than $2000. My fuel
burn is always less than a Lycoming at same speed/distance. It has
not had one hiccup inflight. I used the standard gearbox in second
gear, and it works fine.


You'll still spend a lot of time wringing the engine out
on the ground before you can gain enough confidence that you've done all
your homework.

This we agree on! Few would be dumb enough to leave mother earth and
wonder if the motor will make good power. In my case, the weather was too
cold to do layups anyway, so I enjoyed the time spent testing my motor.

BTW, I repair turbocharged diesel engined trucks for my living, and often
wonder if a part would be as reliable if it weighed one-tenth of what
the good ones weigh in at. Not likely.

The BSFC of the Mazda wankle can get as good as .42, where the Lycoming
is over .5, and the turbo diesel is best at .36 lbs/hp/hr.

I am aware that most people should avoid trying to craft their own
airplane engine, but if you are so inclined, the Wankle rules!

George Graham
RX-7 Powered Graham-EZ, N4449E
Homepage http://bfn.org/~ca266