![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Thanks for your reply, Noi:
Yes, I have reinstalled several times, and the trim is centered, however with both sticks with the FS9 default aircraft my rudder does not seem to want to stay centered, however with add on aircraft like the package I just got it seems to work a lot better. I'm sure it must be something I'm doing...I just can't figure out what ![]() "Noi" wrote in message news ![]() On Sun, 23 Nov 2003 09:43:21 +0000, SouthBayGuy without thinking wrote: Did you uninstall and reinstall FS9? Checked rudder trim? Thanks for your reply, glatherm: Well no it won't fly straight and level, really. Without the A/P I am constantly having to readjust power/trim, and still find myself climbing or descending about 300fpm. It's either my poor skills as a sim pilot after all these years, or none of the joysticks i've tried will calibrate exactly correct on this computer of mine. I still tend to think it's a combination of my lousy flying and the default flight models and whatever bugs are present in FS9. I'm tending to believe what I do about the flight models because I got the "Perfect Flight General Aviation Adventures" add on from the internet the other day (because it has a citiation in it) and although the graphics on the planes and panel's aren't up to MS, the planes handle much better. Thanks for the tip on the Mooney I'll try it! Regards to all ![]() "glathrem" wrote in message ... If you turn AP off and center the joystick, will it fly straight and level? Sounds like the AP is compensating for a slightly down stick. I have the 3 axis sidewinder and it works fine, except that FS9 pushes buttons on it's own occasionally. I do see the quick turbulence bump you have once in a while. That Mooney Bravo is a bummer. It won't fly straight unless you continuously switch fuel tanks. It only draws fuel from one tank at a time and quickly becomes unbalanced enough to turn. Would be a really nice plane except for that. My system is not much better than yours; 1.8ghz, Nvidia 64mb (geforce4), XP sp1, 512 ram...... I most of the time maintain 20FPS with most sliders maxed out (the sliders important to me anyway). "SouthBayGuy" wrote in message link.net... Hello Everyone: I was hoping that someone with more experience than I could help me with some questions/problems that I have with MS Flight Sim 2004. I have owned all of the FS since 4.0, and the one that has worked best for me has been 2002. A couple of weeks ago, I got 2004, and am quite happy with it as an "upgrade," more for the "little things" (more choices in ATC, better GPS, etc), but have had some problems that are either brand new, or seem to have gotten worse in this version. First, my system; Compaq 1.6 GHz Pentium 4 512 mb RAM 433mhz bus 80gb 7200 EIDE HDD 80gb Maxtor external HDD (USB) NVIDIA Geoforce 2MMX 64MB video (yeah yeah, I know) Windows XP Home SP1 with all the lil "patches" Saitek Cyborg EVO Joystick This system can run FS2004 fairly well, good frame rate, not the best scenery detail of course, but I use FS mostly as a recreational thing, to do the flying that I cant afford, and am not skilled for yet, in R/L. I have taken some flight training in the past, it's been a long time ago, but I do know what it's like to fly a real 182, etc. With my older video card I've found that the best thing to do is leave it at whatever the program puts at the defaults--that gives the best performance for me. Now, to the issues: 1. Rudder control-Both my joysticks (I also have the MS Sidewinder 2.0 that frankly I'm disappointed with), have twist for rudder. It is VERY DIFFICULT to taxi, to keep the plane on the taxi line and even more difficult to track the center on take off and landing rolls. This occurs in all planes but is worse in the Mooney Bravo. Is this just part of the flight model, ..cfg file, whatever? I don't want to invest in custom rudder controls and have the same problem..that would be very depressing! Also once in the air, the planes especially the light gen av aircraft, wander a bit as far as heading (the Mooney is worst at this). 2. Auto Pilot Problem-Now THIS is the thing that is frustrating. When I'm flying any of the lighter aircraft, really anything other than the airliners, when the A/P is set for altitude it keeps the trim so nose high, the airplane can't pass 80 knots or so. This is especially bad in the 172 182 and Mooney. The twins do it to an extent; it doesn't really happen in the jets because you can set the A/P to maintain IAS. Is there ANY way to stop the A/P from setting the trim so nose high? I've also noticed that when flying along in A/P that periodically the plane will suddenly act like it was hit by a gust (even with wind turned off), slip, raise and fall a bit, then try to go back to the heading and altitude (and of course roll the elevator trim way high! UGH!). The Mooney for seem reason, just seems downright unflyable. Am I doing something wrong, do I have to alter a config file or something? It just seems, from my limited real piloting experience, that real aircraft are about 20 times easier to control. Anyway thanks so much for taking the time to read my post. I would appreciate any help or advice anyone could give. Thanks! |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) | Rich Stowell | Aerobatics | 28 | January 2nd 09 02:26 PM |
Parachute fails to save SR-22 | Capt.Doug | Piloting | 72 | February 10th 05 05:14 AM |
Canadian IFR/VFR Flight Plan | gwengler | Instrument Flight Rules | 4 | August 11th 04 03:55 AM |
x-43 Flight | Garrison Hilliard | Military Aviation | 0 | March 26th 04 12:42 PM |
FA: Flight Training Magazine 110 Issues | Tony St. Clair | Aviation Marketplace | 0 | November 23rd 03 05:00 AM |