![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Well I wonder if someone has to question there own ability as a mechanic
should even attempt to build something that their life will depend on being right. I think it is always a great idea to have some "inspectors" that know aircraft very well to check your work from time to time. Sometimes we ALL can miss something. But you really need self confidence in your work ability to even start. "James M. Knox" wrote in message 2... "Cecil Chapman" wrote in . com: A question I've always wanted to ask homebuilders is based on how I can see one could go through the process of building through lots of hard work and dedication - but how do you get yourself to do that first flight? I would think a thousand questions would fill one's mind (ex: did I tighten or overtighten that blank, are the rivets going to hold,,,, etc.). How does one safely test an 'unknown'..... just curious..... Sounds like a wedding night. G Seriously, remember that you don't just "take to the sky" the minute the last rivet is set. By the time you have the thing built a lot of pieces have been assembled and disassembled and reassembled, and you are probably (certainly should be) VERY familiar with pretty much every piece of that plane. There are test runs of the engine. Even taxi tests. Leak checks are performed. And everything SHOULD be rechecked for proper torque. Rules vary from country to country (some require stage checks), but in the US there is a final exam that must be passed. An examiner goes over the plane (hopefully with a fine tooth comb) for anything that does not look save and conform to safety standards. Only then do you get a certificate to go flying. The first flight itself is interesting. There are books and tapes (and not all agree) on how to do it. Test hops (just a couple of feet in the air) can be made. But usually once you do commit to flight, you go fly. The plane is climbed to a safe altitude (about as high as practical) and a series of test maneuvers is made to verify things like stall speed and wing drop -- things you probably need to know before trying to land. G Yes, mistakes do happen, but considering the number of safe "first flights" taken by experimental aircraft every year, aircraft built often by first-time builders, the success rate is IMHO amazing. jmk |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) | Rich Stowell | Aerobatics | 28 | January 2nd 09 02:26 PM |
Newbie question on Rate of Climb | Wright1902Glider | Home Built | 0 | August 17th 04 03:48 PM |
Newbie Question - Vacuum vs Electric | Bill Denton | Aerobatics | 1 | April 15th 04 11:30 PM |
Flight test report and intake leak question | nauga | Home Built | 11 | April 12th 04 04:12 PM |
Horsepower required for level flight question... | BllFs6 | Home Built | 17 | March 30th 04 12:18 AM |