![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Sorry that you think this is a marketing ploy. I thought that this was
a forum for information exchange. I just wanted to pass along my experiences working with all kinds of coax under a lot of extreme conditions, and the lessons learned from them. As far as the props, If you had designed a prop that gave performance so far beyond the others available and this performance was demonstrated in the best way, wouldn't you want to share that with others? I don't sell cables or props or ignitions; I leave that to others. I guess there are some of you who don't care that there is a revolution in prop design that can give you markedly better performance. Or coax that will up your radio's performance. Perhaps you don't also want me to share with you the research I and another have done to keep your prop bolts tensioned regardless of temperature or humidity. When all you do is put down others who want to share, you can suppress that sharing! |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Antenna ground plane and coax grounding | G. Fred McCutchen | Home Built | 2 | August 8th 04 12:27 PM |
Switching radios on 1 antenna | Nicholas J. Hirsch | Home Built | 16 | June 14th 04 01:49 PM |
Tefzel Wire, RG400 Coax, Crimpers, Terminals, etc.. | Stein Bruch | Home Built | 0 | September 20th 03 04:35 AM |
Military helmet, civilian radios - my solution | Dave Hyde | Home Built | 7 | September 16th 03 01:20 AM |
Transponders, Radios and other avionics procurement questions | Corky Scott | Home Built | 5 | July 2nd 03 11:27 PM |