![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#8
|
|||
|
|||
|
"Marty from Florida" marty@-x-x-x- remove -x-x- worth.net wrote in message ... ........... If anyone has a prop that would fit my 1982 C152 with a Lycoming 0-235/L2 engine, please let me know. I don't want to have to service a prop annually! Thanks again. Marty After reading what I think is the recurring AD for that prop, it's not necessarily an overhaul, but an inspection. It is to check for cracks at the bolt holes around the hub. This inspection is to be done every 800 hrs or 12 months, if it's OK the prop is painted and returned to service. The other AD (one-time) has to do with specific bolts and a spacer used to mount the prop. So you said it was $100 to r/r the prop? How much is a dye test for cracks? to paint? -- Hello, my name is Mike, and I am an airplane addict.... |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Right prop, wrong prop? Wood prop, metal prop? | Gus Rasch | Aerobatics | 1 | February 14th 08 11:18 PM |
| my ignorance | LCT Paintball | Home Built | 25 | April 9th 05 07:54 PM |
| Ivo Prop on O-320 | Dave S | Home Built | 14 | October 15th 04 04:04 AM |
| Major Overhaul | Jim Weir | Owning | 10 | June 8th 04 06:12 PM |
| IVO props... comments.. | Dave S | Home Built | 16 | December 7th 03 12:43 AM |