![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#25
|
|||
|
|||
![]()
Richard Lamb wrote:
Ron Wanttaja wrote: Richard Lamb wrote: Thanks Ron, Right neighborly of you guys. I'll just slip in here behind the Fokker-like thing. http://home.earthlink.net/~cavelamb/formup.jpg That fokker is a Fly Baby: http://www.bowersflybaby.com/pix/junkers.HTM I suspect the spruce content in your design is too low to play with our club... On Mon, 16 Jan 2006 01:20:02 -0600, "Dan, U.S. Air Force, retired" wrote: You aren't thinking big enough. Ask Ron for a copy of the picture showing his Flybaby being in flight refueled by a KC-135 ![]() Twarn't my bird, it was that of a Fly Baby owner in South Africa. The pix (which I freely admit stealing the idea from the RV folks) is at the bottom of: http://www.bowersflybaby.com/stories/altered.HTM Ron Wanttaja "Um, say Lead", "Can you get this gaggle up to 100 knots?" I forgot that I had this one, Ron... Sketched it out one evening, but the texturing kept being weird. The canopy didn't like my cloud reflections. I dunno. But it doesn't fly very well below 100 kts... (I was going to write a keyboard function that allow menu selection of wing camber, area, sweep, etc. while in flight, but I never quite got around to it. Think of it as virtual variable geometry :^) http://home.earthlink.net/~cavelamb/formup2.jpg ta Richard |
Thread Tools | |
Display Modes | |
|
|