Differences between automotive & airplane engines

On Fri, 10 Feb 2006 16:28:10 GMT, Alan Baker
wrote:

In article .com,
wrote:

But when we DO use 'horsepower' we must be careful to
never use it in isolation, always identifing the rotational speed at
which that 'horsepower' is being produced.


Absolutely and utterly wrong.

It is *torque* which must always be associated with the rotational speed
at which it is being produced.

Read that first sentence again. He's not wrong; he just
didn't specify "torque" for those who don't know the relationship
between it and RPM and HP.
When you say "absolutely and utterly" it should be used
only where it applies. Clearly, that's not here.

But that's my point. He is absolutely and utterly wrong, when he says
that you need to know the rotational speed before you know all you need
to know when you know the horsepower.

With horsepower, you can use gearing to get any rotational speed you
want; the horsepower remains constant. Torque changes with gearing.

Yes, you CAN use gearing, at the expense of complexity.And efficiency.
Much better to design the engine to produce the power you need at the
speed you need it. However, sometimes you trade efficiency and
durability for weight - and a geared 1.2 liter 80 hp engine running
at 6000 RPM can weigh significantly less than a direct drive 2.7 liter
engine providing the same power at 2800 rpm. (well, about 40 lbs less,
anyway)