![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Just got our dog a new frisbee (he goes thru 'em pretty fast if we're
careless and leave them within reach after a session). This one has a large outer wire rim, small inner ring, and stretched radially between these 8 or 10 tapered spandex wedges (i.e., these wedges get wider as they go radially outward). There are gaps of comparable width between each of these blades, and each wedge is twisted by 180 degrees between inner and outer rings with most of the twist occurring close to the inner ring, so that these wedges give a reasonably convincing imitation of a multi-bladed propellor. This thing seems to fly just about as well, however, whether you fly it right side up or upside down, and whether you flip it to spin CW or CCW. (Hurts my left arm when I try to spin it CCW, however.) In other words, if there's any helicopter effect here, it's pretty weak. So, how does a frisbee fly, anyway? Another of his favorites is just a 10" diameter weighted outer rim filled in with a slightly saggy "cloth drumhead", which visibly bulges upward 1" or so at the center into a fair imitation of an airfoil when you throw it. I've always figured the heavy rim kept the thing spinning and thus semi-rigid, and the forward motion of the airfoil shape gave the lift. |
Thread Tools | |
Display Modes | |
|
|