3-blade prop?

A friends O-360-A1A started misting his windshield. I think it turned out
to be from a front bearing on the engine.

--
Best Regards,
Mike

http://photoshow.comcast.net/mikenoel

"ktbr" wrote in message
...
Jay Honeck wrote:
Anyone got any experience with CS props going bad? The oil on the
windshield was minimal, and there was only slight evidence of oil on
one blade. Is this something that could:

a) Stay the same over time
Yes
b) Get worse little by little
Yes, or even get better.
c) Let loose all at once
Probably not, but of course you should have it all
inspected by your A&P, or just take off the spinner
and have a look yourself to see if its even coming
from the prop/hub.

A small amount of oil on the windscreen now and
then does happen, especially when weather temp
changes a lot. And, it may not be coming from the
prop. You'd be suprised at just how such a very small
amount of oil can get slung around by the prop and
get on the windscreen.