![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#20
|
|||
|
|||
![]()
Gary Evans wrote:
[discussing the cost of a total engine replacement] While the major 26 engine parts may cost $8k Euro a replacement engine can cost $17k US as one unhappy owner found out the hard way. I sure hope it isn't a common problem, because that would bankrupt a lot of people. A replacement Solo engine costs about $8K, according to the DG dealer. If I were looking at buying one of these gliders and wanted to factor in the potential for a total engine replacement, I'd add $1K to $2K to price of the ASH 26 E, and use that number in my considerations. I wouldn't add the whole $9K difference because I think it's unlikely I'd need to replace engine, but a prospective owner should choose whatever amount he can be comfortable with. I understand that a belt break which stops the water pump results in almost instant over heating which can fry the engine resulting in one of those big bills but as long as you constantly watch the temp gauge and keep one hand on the off switch that shouldn't be a big issue. When two belts break at the same meet however I would no longer call it an unusual occurrence. The belts that broke at the Parowan camp were the propeller drive belts, not the fan belt (the water pump is driven directly by the engine - no belt). The drive belts on the 26 E fleet did not break for many years (for example, mine is 12 years old and has 114 hours on it), but a few of newest gliders have had this happen. We've been told that Gates, the belt manufacturer, changed the construction of the belts about three years ago, and the consequences of that change are now surfacing. Schleicher tells us they will correct this situation. In the meantime, pilots are cautioned to use the handbook procedure for starting the engine, and avoid "pumping" the throttle or the primer when the engine is running slowly. So far, there haven't been any belts break during an in-flight restart. As not all may know, some of the Solo engine systems have also suffered from propeller drive belts breaking, and Ventus/Nimbus self-launchers had (perhaps still have) a 20 hour life limit on the belt. I don't know the exact situation for DG, but they had similar problems. It's my understanding there are also changes in their starting procedure that reduce the problem, and some mechanical changes that may/will eliminate the problem. Gary can inform us on this. Fortunately, the Solo belt breakage was also always on the ground and not in the air (to my knowledge). Interesting that DG's engine management system which automated the process beyond the 26 would be viewed as unnecessary like the parking option on the new Lexus. I guess that means that all development should have just stopped with the 26. Hmmm! As a former electrical engineer that used to help automate processes, I'm all in favor of automation; however, the 26 E system is so simple and reliable, I've not wanted Schleicher to change it. Ps. As I said before IMO both of these ships are good choices but both have advantages and disadvantages. Were that not the case one of these two manufactures would have been out of business by now. You can measure how well DG is doing by the sales volume and innovations. I assume Schleicher is doing as well. You pay your money and take your choice. I do suggest interested buyers research beyond owners opinions as they (we) tend to be a tad biased as you may have noticed. A big problem is it's rare for a pilot to have significant time in BOTH gliders, so he can offer an informed comparison. I urge any prospective owner that is interested in a particular glider but concerned (or particularly interested) about some aspect of it to discuss it with the dealer, and ultimately with factory if the dealer's response isn't enough. These are low volume manufacturers providing expensive, complex machines, so you are more like a partner in the operation than just a customer walking out of Wal-Mart with a toaster under your arm. I've had these conversations with Schleicher over 20 years of owning first an ASW 20 and now the ASH 26 E, so I've got a lot of confidence in the ability and will of the people at Schleicher to provide a good glider, and to make things right if they go wrong. That's the bias on my part, because I'm not nearly so familiar with the crew at DG. DG pilots likely have the opposite experience. So, talk to the owners, the dealer, the factory, maybe the folks that repair them, look carefully at the glider (and be sure to sit in it), and consider that you'll probably be happy with your choice because you won't know what you missed! -- Eric Greenwell - Washington State, USA Change "netto" to "net" to email me directly "Transponders in Sailplanes" on the Soaring Safety Foundation website www.soaringsafety.org/prevention/articles.html "A Guide to Self-launching Sailplane Operation" at www.motorglider.org |
Thread Tools | |
Display Modes | |
|
|