This year's annual

It's been a solid week, and I am still not flying in my Sundowner.....

Problems encountered.

Oil analysis came back with high count of copper
#3 cylinder low on compressions
Corrosion on a side panel of the fuselage
Small pipe (Exhaust outake?) had small crack in it
Air in the brake lines (took ten minutes to bleed)

Things to be replaced (500 hours time since major, hard to believe I have
flown that much in three years!)

Points and condensors
Mags

Things to be fixed

Windshield leakage

All has been done except for the corrosion problem. He scraped off the
paint and most of the corrosion color, but there is a pin hole size pit
(very, very tiny, but still perceptible) in the bare skin. It doesn't go
entirely through the skin, but it's there needless to say. Why in the
area is beyond comprehension since it's on a vertical surface to the
right of the door. Not exactly an area where water collects. Got a pic
if anybody's interested.

Soo, for the #3 cylinder, A&P was able to field service it and get the
compressions up to 65. Remaining three cylinders are in the 70's.

Changed the oil from 15W50 weight to 20W50 weight. Added an engine
additive too. Expensive stuff at $24 a pint!

Small pipe replaced. Brake lines bled. Windshield was sealed.

Only problem remaining to be fixed is the corrosion and repainting the
area. Hoping that what he has done will be good enough. I'd hate to see
what the cost of Beechcraft skin will do to my wallet if it can't be
fixed!

Definately won't rank in the least costly annuals for me.

Allen