![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
just noticed you are in florida. I have the bugee replacement tool and the
gear load check adapter at my hanger at FMY if you need to borrow for an inspection. R. burns "comanche driver" spamawayassh.ole wrote in message . .. just a couple of quick things to check first. check the gear trunion pins- ad on thoses they crack. check logs for dye inspection, repeditive, or replacement with webco units, non repetitive. check gear bungee arms they crack also, no ad but ad on bungees. check main gear castings at the web, they crack there also. check tension on the push-pull gear cables, need a adapter most twinco owners will have one or were to get one, they are easy to make the drawing is in the service manual. if they are dragging to much the need to be replaced, they are available but not cheap to replace. check fuel valves for leaks and screens for corrosion, also part of a AD. check rear bulkhead for cracks and horizonal bearings for play. also AD those are the biggest things right off the top of my head for the twinco check the ad list there are a few repetitive AD's R. burns PA30 N31952 "Jim Burns" wrote in message ... There are many things to think about when buying an airplane but a couple that concern airframes a 1: you can't make it younger 2: you can't make it straighter (reasonably) Money can fix just about everything else, but no amount will never roll back the TTAF meter. As the fleet of GA airplanes gets older there are more and more airplanes approaching 9000+ hours, so the question becomes with all things considered, how much of an effect does the high time have on this airplane's value? The TwinCo is not so rare a bird that there aren't or won't be other comparative examples on the market with lower total airframe times, even if they have slightly higher asking prices. If you look around it's normally easy to find older twins advertised for no more than the value of their engines, props, and radios but even in these instances they often have much less than 9000 hours TT. Jim "E Andersen" wrote in message ... On a twin of that age and advertised at that sale price, I would set aside NO LESS than an additional 50% for additional repair and maintenance that you may incur during your first year of ownership. yeah, I am aware of that, I was more concerned about the airframe, 9000 hours sounds like a lot, I dont know |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
twin comanche | E Andersen | Owning | 10 | February 23rd 07 09:57 PM |
Twin Comanche vs. Mooney/other singles | E Andersen | Owning | 18 | December 17th 06 07:32 PM |
aftermarket de-ice for Twin Comanche | Dico | Owning | 1 | February 5th 06 05:51 PM |
Twin Comanche comparisons | Dico | Owning | 6 | January 30th 06 06:00 PM |
AOPA Twin Comanche | Rosspilot | Piloting | 79 | December 8th 04 07:23 PM |