![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
How hard is it to temporarily remove a Turn and Bank ?
4 Screws and 2 wires. Adjust the weight and balance if you want. If the wires are not easily disconnected, then add a quick connect in the cable. Todd Smith 3S |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bank/turn indicator instrument question | Bruce W.1 | Home Built | 10 | February 17th 05 04:14 PM |
Turn & Bank Indicator and 2 gallons of poyester resin | [email protected] | Aviation Marketplace | 1 | February 14th 05 06:36 PM |
Turn & Bank Indicator and 2 gallons of poyester resin | [email protected] | Piloting | 0 | February 12th 05 07:53 PM |
Turn & Bank Indicator and 2 gallons of poyester resin | [email protected] | Instrument Flight Rules | 0 | February 12th 05 07:52 PM |
Turn & Bank Indicator and 2 gallons of poyester resin | [email protected] | Home Built | 0 | February 12th 05 07:50 PM |