![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#2
|
|||
|
|||
![]()
On Apr 14, 6:49*am, Steve Freeman wrote:
My SZD 55 has a very stiff rudder. When the cables are disconnected it moves easily. One suggestion has been that maybe the tubes the cables ride in are full of dirt and contaminants and that cleaning them will solve the problem. I remembered reading about someone replacing their cables with a smaller diameter cable but could not find anything in the archives. Anyone have any experience with this type of problem? Years ago, when I had a Jantar 1, I accidentally drove a screw through the rudder cable tube in the cockpit when installing a microphone. We removed the rudder cables to check for damage and found I had severed several strands. More interesting, we also found that the factory had done the same thing and I'd been flying with several strands missing. I suggest that you remove the cables and check for damage. If the tube isn't damaged, it might be pinched. I believe mine is not the only report of this problem. Mike |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
1-34 Rudder | Discus 44 | Soaring | 0 | August 17th 08 04:10 AM |
Right Rudder | Ol Shy & Bashful | Piloting | 19 | August 16th 08 04:38 AM |
WTD. SGS 2-33 Rudder | [email protected] | Soaring | 0 | December 20th 06 04:31 AM |
c-152 rudder??? | houstondan | Owning | 39 | December 21st 04 09:21 PM |
c-152 rudder??? | houstondan | Owning | 28 | December 15th 04 09:55 PM |