US Power FLARM Antennas

On 6/12/2012 7:00 AM, Andy wrote:
The data sheet for the PFBrick FLARM TX/RX and PCAS/ADS-B antennas
can be found here :

http://www.linxtechnologies.com/reso...-mhw-xxx-x.pdf

One has to wonder if an antenna tuned for 915MHz is the best choice
for PCAS/ADS-B. Maybe that antenna would be best used as the FLARM RX
only antenna?

I thought the dipole was only for the Flarm A antenna, not the PCAS
antenna, as PCAS already has acceptable range. Remember, PCAS is
receiving signals from 130 to 250 watt transmitters, while Flarm
transmitters are 20 milliwatts or so.

--
Eric Greenwell - Washington State, USA (change ".netto" to ".us" to
email me)