|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#13
November 13th 03, 05:52 AM
|
|||
|
|||
James
That was called "dilution". There was a schedule for different temperatures and it told you how much gas to put in oil prior to shut down. It took about 30 minutes at cruise power to boil the gas out of the oil next day. You could take off with diluted oil if you had oil pressure in the green. Oh the good ole days. Haven't thought about 'dilution' in years. Tnx for bringing up  )Big John On Wed, 12 Nov 2003 21:29:40 -0500 (EST), (James Lloyd) wrote: Years ago,we would put some gas into the oil right after shutdown and that would keep it loose for quite a while and then just burn off when running again.Jim 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode