air drill question

On 21 Nov 2003 03:04 PM, Ded Dog posted the following:
Thanks for posts. Just starting out . Have some manuals but none with
this information. What would be the gold standard of reference manuals
for this information. Had wanted to buy a drill for mostly #30 and 40
drill bits but was at a loss with all the rpm ranges. Sounds like for
aluminum I should be looking at a higher rpm range than I originally
thought.
I had thought this group was amoung other things to use members as a
resource. I suppose I shouldn't be suprised that someone should
criticize me for asking what to some might be obvious, but I don't
think this is a community that eats its young. I might need some more
help in the future. KM

A brief Google search came up with the following info related to drill
speeds:

http://www.micoks.net/~dbennett/dpsc.html
A Palm application

http://www.collinsclubs.com/woodwork...speedchart.pdf
A PDF chart, not totally useful since it only goes as high as 3000 rpm (
meant for drill presses)

http://www.auto-ware.com/techref/drillspeed.htm
A simple chart which only has fractional sizes by sixteenths.

http://209.92.149.105/keo/faq.asp
Scroll down to the bottom for information which will allow you to
calculate RPM and feed rates for amy material and any bit size.

----------------------------------------------------
Del Rawlins-
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/