Dittel Dynamic Mic wiring

Hi Charlie,sorry it is a Dittel F10039 Dynamic mic. It has a ground
braided wire, one white wire and one brown wire.
Doug
At 22:05 05 February 2015, Charlie M. UH & 002 owner/pilot
wrote:
On Wednesday, February 4, 2015 at 7:45:06 PM UTC-5, Doug
Mueller wrote:
Hello all, I have a dittel FSG-60M Radio in my glider. It has a
mic plug
with a telex IR Electric headset. The headset is inconvenient and
I got a

Dynamic Mic from Wings and wheels. The glider was hard
wired with a
PTT and a separate speaker. I have removed the plug on the
end of the
mic and I wish to hard wire the mic. A brown,white wire with a
ground
are in the mic line. I do not have a wiring diagram for the mic. I
looked

at the FSG-60M installation instructions was trying to figure out
if an
amplifier is needed to run the new set up. W&W was not very
helpful
and I could use some expertise as I thought it would be rather
simple
to replace the mic. The radio is set up for a dynamic mic
already. It is
inscribed on the outer case. I do not believe it was ever
changed from
the previous owner. Anybody with experience with this set up?
Thanks,
Doug

Doug, no problem.
From what I read, I didn't see which mic you're going to, thus no
further
info.
Pass that on (what mic you're going to), maybe one of can provide
some more
info.
If nothing else, this thread may come up (with similar
questions/search),
thus more info linked for the next person..... ;-)