Piper Wing Lighting

Not really. Two lamps exceed the current capacity of the switch. You could use a
similar switch that has two poles operated by a single rocker to control the wing
lights, but the nose light would still have to be separate. The other option is to
use relays actuated by the nose light circuit like I did on mine. The relays are
piper relays rated for continuous use. I believe they are the same part number as
the avionics master relay.

Jessewright8 wrote:

I moved
things around to have the original switch power the cowl and the split
switch power the wing lights.

Do I understand this right.. after installing the kit, each wing light is
controlled independently from each other. Does the STC allow you to substitute
a "standard" type single switch in lieu of the split switch?

Jesse
N4372X

--
--Ray Andraka, P.E.
President, the Andraka Consulting Group, Inc.
401/884-7930 Fax 401/884-7950
email
http://www.andraka.com

"They that give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety."
-Benjamin Franklin, 1759