Polishing & Waxing

Take a close look at the gelcoat, if it has hair-line
cracks starting to appear, then you must wet sand them
out with 600wet, then 800 wet.

Oxyidation can be buffed out. Get a rotary buffer from
your local automotive paint store and a gallon of 3M
liquid rubbing compound. Spread it on with a small
rag dipped in water. Using a wool 5 inch buffing pad,
ease into your 24' X 24' area with firm pressure on
the top edge, keep it moving from left to right. As
the compound starts to disappear, ease off the pressure,
but keep going until she shines. I'll let others tell
you which wax to use, I'm all worn out right now and
not ready to jump right into this years discussion
about which wax to use.
WUSS JJ

At 17:00 23 March 2005, Go wrote:
Just bought a 'new' ship. The gel-coat needs some work.
Not too bad
just a little oxidation.

So, what are people using (materials and tools) to:
Remove slight oxidation.
Polish
Wax (with UV protection)
Buff-out

When talking about buffers, is a rotary buffer the
best to use?

Thanks JJ, er, excuse me, Mr. Wuss. :-)
The benefit of your experience is appreciated.

First, no cracks. Thankfully it is only seven years old and in good
shape.
3M liquid rubbing compound. Where do I get this? Is there any part
number or other identifier?

So, this has been debated before? I just did a search and got seventeen
pages of hits! I'lll go there thanks.

You still flyin' the 'Bat Wing'?

Get some rest,
Go
1PD

Go wrote:
Thanks JJ, er, excuse me, Mr. Wuss. :-)
The benefit of your experience is appreciated.

First, no cracks. Thankfully it is only seven years old and in good
shape.
3M liquid rubbing compound. Where do I get this? Is there any part
number or other identifier?

So, this has been debated before? I just did a search and got
seventeen
pages of hits! I'lll go there thanks.

You still flyin' the 'Bat Wing'?

Get some rest,
Go
1PD


It seems that the most popular compound is 3M Finesse-It II. I've use
it and it works very well. They have another product called Perfect-IT
which is even a finer compound if your finish isn't too bad. They
should be available at any auto bodt pain store. Plan on at least 5 or
6 hours.

Mike

3m Finnesse-II polishing compound and then Racer's Edge Aviation Polish
(It is a wax too).

DV8

Finesse-It II seems to work the best for me (tried various Marine,
Auto, and Aviation varieties). As JJ says, the local auto body store
will have it. Another good alternative is the local boat store.

The bottle I have here says:

Part No. 051131 - it's the Pint variety that I carry with me for
rubbing out stains and landing gear door grime. It comes in quarts,
gallons, and five gallons, IIRC.

I use a DeWalt variable speed polisher and 3M polishing pad with the
nifty hook and loop attachment:
Pad is Part No. 05713; I don' have the part number of the backing
plate, but the guys at the store will know.

Have fun.

P3