![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Ben Jackson wrote:
Of course now I'm thinking paranoid thoughts about more elaborate toolkits for the plane, and just how much such a kit would shift my CG... I have a small kit about he size of a lunch box with: Pliers: needlenose and vice grips. A small open end wrench kit A small socket set. A multi-tipped screwdriver kit. Duct Tape (although I regretted that one: long story). Over the years, I might have added: Safety wire, and pliers A spark plug socke. Depending on your plane you might throw in a few bulbs or valve cover gaskets, or whatever you think you might need. Has saved the day a couple of times. |
|
#2
|
|||
|
|||
|
re Leatherman saving the day: I read an article several years ago
that I should have clipped and saved. It was a story about three guys in a small helicopter, probably a Hiller 12 or Bell 47, that were doing forestry work or something similar in high country. The machine suddenly started climbing and the pilot had to apply full throttle to keep the RPM in the green, and had lost collective control because an unsafetied nut had fallen off the bolt connecting the collective rod to the swash plate and the bolt had departed. The CP caused the system to go full up. Here's the problem: reducing throttle to come down would result in massive RPM loss, and since centrifugal forces are crucial to keeping the blades out straight, this wasn't an option. Full throttle uses up the limited fuel at an alarming rate. Running out of fuel means no autorotation, since the collective can't be reduced. Prepare to die, or fix the problem. One of the forestry guys, after being briefed by the pilot who could see what had happened through that big canopy, climbed out and stood on the structure, and somehow managed to get the collective rod reconnected to the swash plate using the awl of his Leatherman as a bolt. He stayed there and held it in place, with all that machinery whirling over his head, several thousand feet up, balanced on a steel tube, while the pilot brought the thing to earth. This must be somewhere on the 'net. I wouldn't know where. Dan |
|
#3
|
|||
|
|||
|
See that. I should have Googled it *first*:
http://home.earthlink.net/~quade/leatherman.html http://www.avweb.com/news/safety/183041-1.html Same story, two sources. More are listed.Seems to be true enough. Dan |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| At Least He's Honest. Would This Attitude Have 'Saved' Light Airplane Business?? | [email protected] | Owning | 27 | December 31st 04 08:31 AM |
| Nancy saved WA airman, By GRAHAME ARMSTRONG | Otis Willie | Military Aviation | 0 | March 6th 04 11:56 PM |
| Nonsense: Il-76 could have "saved California from fires"... | Vicente Vazquez | Military Aviation | 9 | November 20th 03 03:09 PM |