![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
That's why I advise supplying your own.
Bob "Jay Honeck" wrote in message news:T%Odg.750186$084.532251@attbi_s22... Tell you what I suggest for the futu Lay hands on enough rubber or soft plastic to cover the area of the filler with a good margin around it, and cut out a circle just a tad larger than the filler opening. Tell the lineboy to put it in place before inserting the nozzle. The most damage I've ever had inflicted by a lineman was due to a guy using one of those rubber mats. It had been "stored" in the gravel adjacent to the fuel pump, and (unbeknownst to him) the underside had become caked with sand and small stones. That sand- and rock-paper was ground into the paint by the weight of the line-guy's arm and the edge of the fuel filler spout. It seems silly to have to say it, but if your FBO uses a rubber mat make sure they brush off the loose stuff before laying it on your wing. -- Jay Honeck Iowa City, IA Pathfinder N56993 www.AlexisParkInn.com "Your Aviation Destination" |
#2
|
|||
|
|||
![]()
On Fri, 26 May 2006 17:43:32 -0700, "Bob Gardner"
wrote: Tell you what I suggest for the futu Lay hands on enough rubber or soft plastic to cover the area of the filler with a good margin around it, and cut out a circle just a tad larger than the filler opening. Tell the lineboy to put it in place before inserting the nozzle. I'll bet you could go to a second-hand store and pick up place mats, dish mats, etc that would do the job for pennies. I've stopped over at a number of good sized airports and most of the FBOs used a matt like this to protect the paint. At Tyson McGee (sp?) they even rolled out a carpet for us to walk on. They did that for every plane stopping over. That was a few years ago, so I wonder if they still do it. Roger Halstead (K8RI & ARRL life member) (N833R, S# CD-2 Worlds oldest Debonair) www.rogerhalstead.com |
#3
|
|||
|
|||
![]()
That filler mat will work well. I've seen people use the rubber padding
stores sell for lining drawers of tool boxes as well. The previous owner of our 172 had a lineboy rest the fuel nozzle like you mentioned. On later inspection he found a cracked filler neck on the fuel tank. That's a costly repair for what seems like a harmless action. My A&P taught me to hold the hose over my shoulder, keeping the weight of the hose off of the airplane. For us high wingers you also need to watch and make sure the linemen dont stand on the struts(unless you've got the steps and pads some models do) and bang the ladder into the wings/fuselage/strut. Brock Boss Kyle Boatright wrote: How do the rest of you deal with careless linemen? The kind who scratch your airplane or chip the paint because they are either careless or have not been properly trained on how to avoid damaging aircraft when refueling 'em. |
#4
|
|||
|
|||
![]()
Every owner probably handles things like this differently. I agree it can be
a real hassle when somebody puts a nice dent or ding on that nice new Imron paint job you just forked out 10 grand for. There are two scenarios involved with this type of thing; one at your home field; the other on the road. It's a lot easier to handle it on your home field. Just walk into the flight office and very nicely but with some authority state quite clearly exactly how you wish your airplane to be handled. If using a rag between a hose nozzle and your paint is something you prefer, tell them. I've done this for fifty years and never had a problem. On the other hand, getting serviced at strange fields has it's risks. Trust me I know :-) You can always leave explicit instructions with the line office that define any concerns you might have. Also, something I always did was to have a prepared notice on a neatly done signboard that I left showing in plain sight inside my canopy for the line people to see asking for rags between metal at all times when servicing my airplane. This also served me well through the years, as did the nice little pitot cover my wife made for me out of red fabric with a nice lightning bolt sewn on both sides with the following sewn into it........."DON'T TOUCH THIS. HIGH VOLTAGE" :-)))) Worked like a charm!!! Dudley Henriques "Kyle Boatright" wrote in message ... How do the rest of you deal with careless linemen? The kind who scratch your airplane or chip the paint because they are either careless or have not been properly trained on how to avoid damaging aircraft when refueling 'em. Case in point - this afternoon I stopped by the airport to prep for a trip to the beach tomorrow. I grabbed a couple of maps and the handheld gps from the airplane while the lineman was getting ready to fuel the airplane. By the time I grabbed those things, the lineman had already filled the left tank, and there was a brand spankin' new paint chip near the fuel filler on the tank. How do I know it was brand new? Because I'd just wiped off a nice collection of bugs from the airplane, and it wasn't chipped then... Anyway, I eased over to see how he was coming with the other tank, and he had the entire 10" long nozzle in the right tank and was using a notch in the fuel nozzle's handle to catch the edge of the fuel filler neck to provide a mechanical stop. I say "hey, let me show you something" and show him that the sharp corner of the casting is resting on the fuel filler. He pulls the nozzle out of the tank, and there is a noticable mark on the paint where he was resting the nozzle. He said he didn't realize he was doing that. I didn't point out the new chip on the other wing, which I speculate was caused by either the same technique, or the other technique I've seen many times, where the lineman puts the nozzle into the tank at a 45 degree angle, and the weight of the nozzle rests on the painted edge of the fuel filler. This is my home airport, and the guy was nice enough, so I didn't make an issue out of it, but it is really frustrating to have avoidable dings and chips on your airplane when it costs $5k or $10k to have the thing repainted... BTW, self serve is not an option at my home field, which is why I usually go elsewhere for fuel. That and the high prices that are caused by having to pay the "fuel truck guy" to hang around the airport all day long when there really isn't much fuel being sold... Also, now that I'm giving this more thought, I need to see if the guy dented the bottom of my fuel tanks by sticking the nozzle so far in there... Sheesh... |
#5
|
|||
|
|||
![]()
I just refuel my own plane. I do have a plane that not all lineman have seen
so it usually doesn't take much convincing. When I check in, I either ask for fuel right then and go back out and wait for it or I tell them that I'll order the fuel when I get back. Either way, I'm there for it. As they drive up, I have the ground clip pulled out and clipped on before they get out of their truck. As they are zeroing the counter and unwinding the hose, I'm climbing on my plane so all they have to do is hand it to me. I have only had two guys challenge me that it was against their policy for them to let me fuel. In both cases, I simply said "I understand. Well I guess unless you want to call your boss for an exception, that'll do it then. Sorry to bring you out here for nothing." In both cases, they relented and handed me the fuel nozzle. In one of the above cases, the guy actually said it was against the law for him to let me do the fueling. I didn't argue with him but I did say, "That would be incorrect but I would believe that you have a company polciy against it. Is that what you are thinking of?" He said, "Yea, Yea, that's what I meant. Policy. Stupid policy. After all, it's your plane. Here you go. You want me to get the windshield while your fueling?" -- ------------------------------- Travis Lake N3094P PWK "Dudley Henriques" wrote in message nk.net... Every owner probably handles things like this differently. I agree it can be a real hassle when somebody puts a nice dent or ding on that nice new Imron paint job you just forked out 10 grand for. There are two scenarios involved with this type of thing; one at your home field; the other on the road. It's a lot easier to handle it on your home field. Just walk into the flight office and very nicely but with some authority state quite clearly exactly how you wish your airplane to be handled. If using a rag between a hose nozzle and your paint is something you prefer, tell them. I've done this for fifty years and never had a problem. On the other hand, getting serviced at strange fields has it's risks. Trust me I know :-) You can always leave explicit instructions with the line office that define any concerns you might have. Also, something I always did was to have a prepared notice on a neatly done signboard that I left showing in plain sight inside my canopy for the line people to see asking for rags between metal at all times when servicing my airplane. This also served me well through the years, as did the nice little pitot cover my wife made for me out of red fabric with a nice lightning bolt sewn on both sides with the following sewn into it........."DON'T TOUCH THIS. HIGH VOLTAGE" :-)))) Worked like a charm!!! Dudley Henriques "Kyle Boatright" wrote in message ... How do the rest of you deal with careless linemen? The kind who scratch your airplane or chip the paint because they are either careless or have not been properly trained on how to avoid damaging aircraft when refueling 'em. Case in point - this afternoon I stopped by the airport to prep for a trip to the beach tomorrow. I grabbed a couple of maps and the handheld gps from the airplane while the lineman was getting ready to fuel the airplane. By the time I grabbed those things, the lineman had already filled the left tank, and there was a brand spankin' new paint chip near the fuel filler on the tank. How do I know it was brand new? Because I'd just wiped off a nice collection of bugs from the airplane, and it wasn't chipped then... Anyway, I eased over to see how he was coming with the other tank, and he had the entire 10" long nozzle in the right tank and was using a notch in the fuel nozzle's handle to catch the edge of the fuel filler neck to provide a mechanical stop. I say "hey, let me show you something" and show him that the sharp corner of the casting is resting on the fuel filler. He pulls the nozzle out of the tank, and there is a noticable mark on the paint where he was resting the nozzle. He said he didn't realize he was doing that. I didn't point out the new chip on the other wing, which I speculate was caused by either the same technique, or the other technique I've seen many times, where the lineman puts the nozzle into the tank at a 45 degree angle, and the weight of the nozzle rests on the painted edge of the fuel filler. This is my home airport, and the guy was nice enough, so I didn't make an issue out of it, but it is really frustrating to have avoidable dings and chips on your airplane when it costs $5k or $10k to have the thing repainted... BTW, self serve is not an option at my home field, which is why I usually go elsewhere for fuel. That and the high prices that are caused by having to pay the "fuel truck guy" to hang around the airport all day long when there really isn't much fuel being sold... Also, now that I'm giving this more thought, I need to see if the guy dented the bottom of my fuel tanks by sticking the nozzle so far in there... Sheesh... |
#6
|
|||
|
|||
![]()
Actually, in Oregon, it IS against the law to fuel your own airplane. Can't
fuel your own car either. Karl "Curator" N185KG In one of the above cases, the guy actually said it was against the law for him to let me do the fueling. I didn't argue with him but I did say, "That would be incorrect but I would believe that you have a company polciy against it. Is that what you are thinking of?" He said, "Yea, Yea, that's what I meant. Policy. Stupid policy. After all, it's your plane. Here you go. You want me to get the windshield while your fueling?" -- ------------------------------- Travis Lake N3094P PWK |
#7
|
|||
|
|||
![]()
karl gruber wrote:
Actually, in Oregon, it IS against the law to fuel your own airplane. Can't fuel your own car either. Heh, even in New Jersey (no self service at service stations) you can fuel your own airplane, and the marina "line man" will hand you the nozzle to fill your boat too. Go figure. The only exception to the self service for road vehicles that I've found in NJ is the base gase station at McGuire. |
#8
|
|||
|
|||
![]()
Jessica wrote:
karl gruber wrote: Actually, in Oregon, it IS against the law to fuel your own airplane. Can't fuel your own car either. Heh, even in New Jersey (no self service at service stations) you can fuel your own airplane, and the marina "line man" will hand you the nozzle to fill your boat too. Go figure. The only exception to the self service for road vehicles that I've found in NJ is the base gase station at McGuire. That's because the airports and the marinas weren't the one that got that law put in placed. Despite the bogus claims of safety, the reason the law exists is because the small gas station owners banded together with enough political clout to stave off the single employee mega gas and go that they feared would put them out of business. |
#9
|
|||
|
|||
![]()
But you can always stand there an supervise, it is the PIC
duty. Let the coffee wait. If you have to ****, do it on the ramp, but be there to talk to the line guy and see to the cleanliness and procedures. -- James H. Macklin ATP,CFI,A&P -- The people think the Constitution protects their rights; But government sees it as an obstacle to be overcome. some support http://www.usdoj.gov/olc/secondamendment2.htm See http://www.fija.org/ more about your rights and duties. "karl gruber" wrote in message ... | Actually, in Oregon, it IS against the law to fuel your own airplane. Can't | fuel your own car either. | | Karl | "Curator" N185KG | | | In one of the above cases, the guy actually said it was against the law | for him to let me do the fueling. I didn't argue with him but I did say, | "That would be incorrect but I would believe that you have a company | polciy against it. Is that what you are thinking of?" He said, "Yea, Yea, | that's what I meant. Policy. Stupid policy. After all, it's your plane. | Here you go. You want me to get the windshield while your fueling?" | | -- | ------------------------------- | Travis | Lake N3094P | PWK | | | |
#10
|
|||
|
|||
![]() "karl gruber" wrote in message ... Actually, in Oregon, it IS against the law to fuel your own airplane. Can't fuel your own car either. Karl "Curator" N185KG Really? Cite? Al |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADIZ pilot's ticket revoked | A.Coleman | Piloting | 234 | May 30th 05 02:55 AM |
ntsb report | Peter Clark | Instrument Flight Rules | 38 | April 1st 05 03:18 AM |