Why does airspeed change when I adjust the prop?

On Tue, 16 Jan 2007 10:29:50 -0800, Mxsmanic wrote
(in article ):



So what do you gain with the prop adjustment? Just a reduction in
wear and tear and/or noise?

No, you get a lot more than that. If you had the manual for a Baron you would
see. But let us look at the Cessna 206H, a single engine plane with a
constant speed prop.

At 8000 feet, with 22 inches MP and 2500 RPM, you generate 69BPH and have an
airspeed of 139 KTAS and burn 15.6 GPH. At 2100 RPM you generate only 57 BPH
and have an airspeed of 126 KTAS and burn 13.2 GPH. This is interesting, in
that you get exactly these same numbers (57 BPH, 126 KTAS, and 13.2 GPH) if
you have 2200 RPM but only 21 inches MP. And it is only slightly different at
2300 RPM and 20 inches MP.

Obviously, a reduction in either MP or RPM reduces your horsepower, airspeed,
and fuel consumption.

If you were in a fixed prop Cessna 172, you would have your throttle full
forward on takeoff in order to generate maximum horsepower. You want to get
away from the ground as quickly as possible, both for safety and noise
abatement (the sound of crumpling metal annoys the neighbors). But because
the prop has a fixed pitch, you cannot increase RPM. You cannot increase MP
because you already gave it full throttle. As the airplane pitches up the
prop will slow down. So you no longer have full power. If only you could
reduce the pitch of the prop to keep it at 2700 rpm. Well, in a CSP plane,
you can do exactly that. A constant speed prop is a performance enhancement.
It allows you to use all the power the engine has, at least until you have
climbed high enough that you need to turbocharge the engine, anyway.