Help - Info for JetHawk II

On Feb 5, 2:01*pm, MOTORCITYBADBOY MOTORCITYBADBOY.3n5...@no-
mx.forums.travel.com wrote:
I'm looking for any info on a design called the JetHawk II. Plans would
be cool, or info on the designer/company.

My rule of thumb is that if Google doesn't bring up much info about a
proposed or preliminary aircraft design, then the design probably went
nowhere and there are no plans and no prototype. I found a couple of
forums where posts suggested that there was in fact a flying JetHawk
prototype and even plans available, but digging into it shows that the
plans were not well-received.

One of the best links I found was this page, it has a cutaway view
that shows the internal configuration of the JetHawk II:

http://massflow.archivale.com/

It's kind of a neat looking little airplane, but I take it with a
grain of salt of epic proportions:

* Ducted fan installations, with almost no exceptions, have
underperformed their expected results in thrust per unit everything
including weight, complexity, fuel consumption, and cost.

* The mixing of composite shells and welded steel trusses has rarely
been a match made in heaven. There are some bright exceptions,
including the GlasStar, and the old Sequoia 300, and some marriages of
necessity such as the Stemme S10 motorgliders. But for the most part
you'd come out ahead in strength and stiffness per pound and per
dollar if you just took the weight of the steel trusses and added that
much more material in shell thickness and in reinforcements to the
composite parts to make them structural members. The mixing of steel
trusses is too often the mark of a developer who is unfamiliar with
the design and development of composite parts.

Thanks, Bob K.