PowerFLARM firmware v3.00 released (feature complete)

Andrzej Kobus wrote, On 5/16/2013 5:58 AM:
On May 16, 8:10 am, Dave Nadler wrote:
On Wednesday, May 15, 2013 11:43:05 PM UTC-4, Matt Herron Jr. wrote:
I guess I could unscrew my glare shield after every flight,
but I don't want to.

Get one of these:http://www.frontx.com/pro/p1011_036.html

Oudie will hopefully display (nearly instantaneous)
IGC file download progress information.

Hope that helps,
Best Regards, Dave

I have a brick and I still can't update a config file or firmware with
this cable because I don't see the LED on the unit. I actually need to
take off the canopy. Is there solution to this problem coming?
Shouldn't a display show this LED status through the communication
protocol. This a big pain in the rear end.

Firmware _updates_ are rare, so that is a small inconvenience. Updating
the config file doesn't need any LED watching. It's not an "update", it
just reads a tiny file into the box. Just leave the USB stick in the
unit all the time, and it will read the file automatically in a fraction
of second as it starts up - no need to monitor it.

--
Eric Greenwell - Washington State, USA (change ".netto" to ".us" to
email me)
- "Transponders in Sailplanes - Feb/2010" also ADS-B, PCAS, Flarm
http://tinyurl.com/yb3xywl