Marske Pioneer Cross Country

Bring back the old RAS I say...
Lets have some good flame wars....

I was getting bored reading all the group patting on backs and all that
being nice that was going on in here!!!

Amazing one post and Lennie the Looney and Liam "I cant fly but I can type"
Finley pipe in, I am getting a case of deja vu here.

Oh and Lennie its Macdonald.. ok no cap D, I am not Irish...but then again
if you knew anything other than metal working you would know that.

Al
Incline Village NV..... some "slum" 40mins NW of Minden.




"Gary Evans" wrote in message
...
Now its complete, just like old times!

At 02:48 29 June 2004, Lennie The Lurker wrote:
'mat Redsell' wrote in message news:...

Please someone put a full name to Al so I can list
his comments in my
History of the Marske flying wing under the Flying
wing misconceptions and
prejudice chapter, at least I have a chance to have
the last chuckle.

Alastair MacDonald, lives in some kind of slum near
Minden.

On Mon, 28 Jun 2004 23:26:58 -0700, "Al" wrote:

Bring back the old RAS I say...
Lets have some good flame wars....

Flame away, alice. I'm still deciding how much to charge for the
seven Schweizer skids I sent to the gliderport last week. Whether I
let them fall through the cracks, or charge $50 each means nothing to
me, Uncle Sam gets it all anyhow. Thought about swapping for an hours
dual in the 2-33, but the more I think about it, bad idea. Oh, well,
three or four more days to decide.
Lennie the Lurker

Indeed, what would RAS be without:

1. a travelling snake oil/flying wing salesman.
2. a racist metal grinder/Schweizer afficianado.
3. a Minden Zero who needs to buy a new glider every 6 months to
impress his friends.

It looks like we hit the Trifecta!

(Liam Finley) wrote in message . com...
Indeed, what would RAS be without:

1. a travelling snake oil/flying wing salesman.

And the list of your accomplishments in the arena of design and
testing are?

2. a racist metal grinder/Schweizer afficianado.

Sorry, I only grind when I need extreme precision, nothing in a glider
counts there.

not racist either, just can't stand egotistical krauts. My granfather
may have been born in Bremen, but he had the good sense to get the
hell out of krautland. (He didn't allow german used in his house
either, "Ve are Americans now, Ve Vill speak English." Fast way to
get a knot on your head was to use german in his house.) Point of
pride in our family, Gramps deserted from the Kaisers guard.

But I finally got to see the grob 103SL fly two weeks ago. It's rare
that it's not in the hangar being worked on. Ground hog is the best
description. 2000 feet of runway to get a foot high?

Keep taking the pet meds Dick..

Al
"Lennie the Lurker" wrote in message
om...
(Liam Finley) wrote in message
. com...
Indeed, what would RAS be without:

1. a travelling snake oil/flying wing salesman.

And the list of your accomplishments in the arena of design and
testing are?

2. a racist metal grinder/Schweizer afficianado.

Sorry, I only grind when I need extreme precision, nothing in a glider
counts there.

not racist either, just can't stand egotistical krauts. My granfather
may have been born in Bremen, but he had the good sense to get the
hell out of krautland. (He didn't allow german used in his house
either, "Ve are Americans now, Ve Vill speak English." Fast way to
get a knot on your head was to use german in his house.) Point of
pride in our family, Gramps deserted from the Kaisers guard.

But I finally got to see the grob 103SL fly two weeks ago. It's rare
that it's not in the hangar being worked on. Ground hog is the best
description. 2000 feet of runway to get a foot high?

(Lennie the Lurker) wrote in message . com...
(Liam Finley) wrote in message . com...
Indeed, what would RAS be without:

1. a travelling snake oil/flying wing salesman.

And the list of your accomplishments in the arena of design and
testing are?

2. a racist metal grinder/Schweizer afficianado.

Sorry, I only grind when I need extreme precision, nothing in a glider
counts there.

not racist either, just can't stand egotistical krauts. My granfather
may have been born in Bremen, but he had the good sense to get the
hell out of krautland. (He didn't allow german used in his house
either, "Ve are Americans now, Ve Vill speak English." Fast way to
get a knot on your head was to use german in his house.) Point of
pride in our family, Gramps deserted from the Kaisers guard.

But I finally got to see the grob 103SL fly two weeks ago. It's rare
that it's not in the hangar being worked on. Ground hog is the best
description. 2000 feet of runway to get a foot high?

Definition of "racist":

1. The belief that race accounts for differences in human character or
ability and that a particular race is superior to others.

2. Discrimination or prejudice based on race.

Al,

just before you left RAS to moderate your own forum,
many of your posts were merely adverts for what was
happening over on www.gliderforum.com

Please therefore explain your hypocrisy when you accuse
Matt of spamming.....

Regards,

Tim

At 06:42 29 June 2004, Al wrote:
Bring back the old RAS I say...
Lets have some good flame wars....

I was getting bored reading all the group patting on
backs and all that
being nice that was going on in here!!!

Amazing one post and Lennie the Looney and Liam 'I
cant fly but I can type'
Finley pipe in, I am getting a case of deja vu here.

Oh and Lennie its Macdonald.. ok no cap D, I am not
Irish...but then again
if you knew anything other than metal working you would
know that.

Al
Incline Village NV..... some 'slum' 40mins NW of Minden.




'Gary Evans' wrote in message
...
Now its complete, just like old times!

At 02:48 29 June 2004, Lennie The Lurker wrote:
'mat Redsell' wrote in message news:...

Please someone put a full name to Al so I can list
his comments in my
History of the Marske flying wing under the Flying
wing misconceptions and
prejudice chapter, at least I have a chance to have
the last chuckle.

Alastair MacDonald, lives in some kind of slum near
Minden.

Difference is I dont sell anything.

www.gliderforum.com is free, non profit. a service to soaring and a lot
better than NNTP news.

Mat on the other hand is trying to sell flying wing kits for commercial
gain.

There is your difference!!

Al
www.gliderforum.com
a Lennie free place to chat about soaring.




"Tim Maw" wrote in message
...
Al,

just before you left RAS to moderate your own forum,
many of your posts were merely adverts for what was
happening over on www.gliderforum.com

Please therefore explain your hypocrisy when you accuse
Matt of spamming.....

Regards,

Tim

At 06:42 29 June 2004, Al wrote:
Bring back the old RAS I say...
Lets have some good flame wars....

I was getting bored reading all the group patting on
backs and all that
being nice that was going on in here!!!

Amazing one post and Lennie the Looney and Liam 'I
cant fly but I can type'
Finley pipe in, I am getting a case of deja vu here.

Oh and Lennie its Macdonald.. ok no cap D, I am not
Irish...but then again
if you knew anything other than metal working you would
know that.

Al
Incline Village NV..... some 'slum' 40mins NW of Minden.




'Gary Evans' wrote in message
...
Now its complete, just like old times!

At 02:48 29 June 2004, Lennie The Lurker wrote:
'mat Redsell' wrote in message news:...

Please someone put a full name to Al so I can list
his comments in my
History of the Marske flying wing under the Flying
wing misconceptions and
prejudice chapter, at least I have a chance to have
the last chuckle.

Alastair MacDonald, lives in some kind of slum near
Minden.

On Wed, 30 Jun 2004 09:17:24 -0700, "Al" wrote:


www.gliderforum.used.condom
a Lennie free place to chat about soaring.

alice is so proud of that, but he forgets, dynamic IP is the thing
now. Not to worry, there's nothing on any of his trashy sites that
I'd ever want to look at anyhow. LIke alice himself, they're just a
waste.


Lennie the Lurker

Al,

you don't have to be selling anything to send spam.
Spam being 'unsolicited mail to promote products or
services'.

Matt is promoting a product, you are promoting a service....
What/ where is the difference?!?


At 16:30 30 June 2004, Al wrote:
Difference is I dont sell anything.

www.gliderforum.com is free, non profit. a service
to soaring and a lot
better than NNTP news.

Mat on the other hand is trying to sell flying wing
kits for commercial
gain.

There is your difference!!

Al
www.gliderforum.com
a Lennie free place to chat about soaring.




'Tim Maw' wrote in message
...
Al,

just before you left RAS to moderate your own forum,
many of your posts were merely adverts for what was
happening over on www.gliderforum.com

Please therefore explain your hypocrisy when you accuse
Matt of spamming.....

Regards,

Tim

At 06:42 29 June 2004, Al wrote:
Bring back the old RAS I say...
Lets have some good flame wars....

I was getting bored reading all the group patting
on
backs and all that
being nice that was going on in here!!!

Amazing one post and Lennie the Looney and Liam 'I
cant fly but I can type'
Finley pipe in, I am getting a case of deja vu here.

Oh and Lennie its Macdonald.. ok no cap D, I am not
Irish...but then again
if you knew anything other than metal working you
would
know that.

Al
Incline Village NV..... some 'slum' 40mins NW of Minden.




'Gary Evans' wrote in message
...
Now its complete, just like old times!

At 02:48 29 June 2004, Lennie The Lurker wrote:
'mat Redsell' wrote in message news:...

Please someone put a full name to Al so I can
list
his comments in my
History of the Marske flying wing under the Flying
wing misconceptions and
prejudice chapter, at least I have a chance to
have
the last chuckle.

Alastair MacDonald, lives in some kind of slum near
Minden.