Pireps on Avionics

Logically, equipment installation at Oshkosh would cost you more than
getting it
done when you get home, not less.

Well, in theory anyway, one could keep the price low because of the
expected volume -- despite the valid problems you mention.

You would think that the avionics tech in question might install more
nav/coms in one week at OSH than they would in 6 months of sitting
around their shop.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

Jay Honeck wrote:

You would think that the avionics tech in question might install more
nav/coms in one week at OSH than they would in 6 months of sitting
around their shop.

Maybe yours sits around -- mine doesn't. He has all the business he can handle.

Come to think of it, I'm not sure I want something installed by a tech who has
to go to Oshkosh to drum up business.

George Patterson
I prefer Heaven for climate but Hell for company.

My local avionics shop had a hell of a time moving his 'certified repair
station' across the field. Took several months. Fortunately, he waited until
everything was in place before he closed up the old shop.

I wouldn't want to try to convince the FAA to certify my u-haul van.

On the other hand, when I went, a friend bought some new gyros. My co-pilot
is an A&P, so installed them on the field. Worked out OK except it had
problems on the test flight. He had to do without until the next planned
stopping point. There were seven planes, and we weren't stopping because his
gyro wasn't working. Didn't need them anyway. We could see across Lake
Michigan from the shoreline.

"Jay Honeck" wrote in message
news:31iYd.54946$Ze3.54106@attbi_s51...
They probably meant dealers do have specials, but nobody installs
anything.

Which, IMHO, is a huge opportunity at OSH.

For example, most large motorcycle rallies (like Americade in New York --
a
rough parallel to OSH for aircraft) offer similar savings on accessories
(they even have GPS, just like we do) -- but, most importantly, they offer
to install the stuff ON THE SPOT.

I've often wondered why some enterprising young avionics tech doesn't take
this to heart, and offer a "mobile installation" option. They could drive
their van out to your plane in the North 40, and install your new toys,
for
a fee.

I'll bet they would clean up.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

On the other hand, when I went, a friend bought some new gyros. My
co-pilot
is an A&P, so installed them on the field. Worked out OK except it had
problems on the test flight. He had to do without until the next planned
stopping point. There were seven planes, and we weren't stopping because
his
gyro wasn't working. Didn't need them anyway. We could see across Lake
Michigan from the shoreline.

Flying across Lake Michigan makes me shiver.

Flying across without gyros makes me cringe.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

Like I said, we could see the other shore the whole time we were over water.
There were five of us flying together, so someone was always checking on us.

What scared me was seeing the Piper Cub half way across at about 1000'. We
were at 10500.


"Jay Honeck" wrote in message
news:_BCYd.121083$tl3.58557@attbi_s02...


Flying across Lake Michigan makes me shiver.

Flying across without gyros makes me cringe.

Robbie S. wrote:
I am planning to put some avionics in a C182 I bought (Garmin GNS430,

GMA340, 106A etc.). Someone made a remark that if I go to Oshkosh
this
year, I could probably get it done quite inexpensively while I am
there.

Please let me know if anyone has had any good/bad experience with
this ?

...Robbie.

Dear Robbie:

I noticed that you are planning on installing a GARMIN GMA340, I was
wondering if you had considered PS Engineering's audio panels?

Are you planning on installing any type of music input? (Such as a jack
for a portable device or even a panel mounted IFE)

The reason I ask is to get an insight of your decision making process
and to learn how much information you had when selecting the audio
panel.

Thanks for your input, it helps me to see how we are doing as far as
getting the benefits of purchasing our products, as far as the
marketing end of things.

Sincerely,
Mark Scheuer
PS Engineering, Inc.
www.ps-engineering.com

Thank you for the comments. I am still in the eval/planning phase and have
been researching the various options. I have been looking at PMA8000 unit
as well along with the CD player option. In the end, it all comes down to
the most bang for the buck.....

....Robbie.


Dear Robbie:

I noticed that you are planning on installing a GARMIN GMA340, I was
wondering if you had considered PS Engineering's audio panels?

Are you planning on installing any type of music input? (Such as a jack
for a portable device or even a panel mounted IFE)

The reason I ask is to get an insight of your decision making process
and to learn how much information you had when selecting the audio
panel.

Thanks for your input, it helps me to see how we are doing as far as
getting the benefits of purchasing our products, as far as the
marketing end of things.

Sincerely,
Mark Scheuer
PS Engineering, Inc.
www.ps-engineering.com

I just saw an ad in Plane & Pilot that Ireceive Friday for the new
PS8000 that includes a Serius radio player.

Robbie S. wrote:
Thank you for the comments. I am still in the eval/planning phase and have
been researching the various options. I have been looking at PMA8000 unit
as well along with the CD player option. In the end, it all comes down to
the most bang for the buck.....