Video of THERMITE REACTION at WTC on 9/11

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm



Also see Prof Jones updated paper (version 5.4)
http://www.physics.byu.edu/research/energy/htm7.html


Scholars for 9/11 Truth
http://st911.org

"Wake UP!" wrote:

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm

That most likely is melting aluminum. It has been said to be likely
that aircraft wreckage piled up in that corner of the South Tower.

On Fri, 10 Mar 2006 23:15:27 -0500, Scott M. Kozel wrote:
"Wake UP!" wrote:

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm

That most likely is melting aluminum. It has been said to be likely
that aircraft wreckage piled up in that corner of the South Tower.

You don't even need aircraft wreckage for aluminum to have been
the source of the sparks and apparently molten material. The
external metal sheathing on the World Trade Center towers was
an aluminum alloy [1].

Aluminum's melting point is around 1,200 degrees F, a temperature
that's easily reached in building fires.


ljd

[1] http://americanhistory.si.edu/septem...ord.asp?ID=104

In article ,
Laurence Doering wrote:

On Fri, 10 Mar 2006 23:15:27 -0500, Scott M. Kozel
wrote:
"Wake UP!" wrote:

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm

That most likely is melting aluminum. It has been said to be likely
that aircraft wreckage piled up in that corner of the South Tower.

You don't even need aircraft wreckage for aluminum to have been
the source of the sparks and apparently molten material. The
external metal sheathing on the World Trade Center towers was
an aluminum alloy [1].

Aluminum's melting point is around 1,200 degrees F, a temperature
that's easily reached in building fires.

[1] http://americanhistory.si.edu/septem...ord.asp?ID=104

And, as a side note, steel weakens dramatically in fires nowhere close
to its melting point. My VW Bug caught fire a few weeks back, and the
steel carburetor spring went "unspringy." This was for a five minute
fire, with small amounts of gasoline and rubber as the fuels.

There is also the consideration of metals beside steel and aluminum in
the fires - magnesium, for example. There was a good bit in the planes
that hit the Towers, and it melts and catches fire quite easily at a
mere 600 degrees C.

"Chad Irby" wrote in message
...
In article ,
Laurence Doering wrote:

On Fri, 10 Mar 2006 23:15:27 -0500, Scott M. Kozel
wrote:
"Wake UP!" wrote:

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm

That most likely is melting aluminum. It has been said to be likely
that aircraft wreckage piled up in that corner of the South Tower.

You don't even need aircraft wreckage for aluminum to have been
the source of the sparks and apparently molten material. The
external metal sheathing on the World Trade Center towers was
an aluminum alloy [1].

Aluminum's melting point is around 1,200 degrees F, a temperature
that's easily reached in building fires.

[1]
http://americanhistory.si.edu/septem...ord.asp?ID=104

And, as a side note, steel weakens dramatically in fires nowhere close
to its melting point. My VW Bug caught fire a few weeks back, and the
steel carburetor spring went "unspringy." This was for a five minute
fire, with small amounts of gasoline and rubber as the fuels.

There is also the consideration of metals beside steel and aluminum in
the fires - magnesium, for example. There was a good bit in the planes
that hit the Towers, and it melts and catches fire quite easily at a
mere 600 degrees C.

Watch it with the facts there - you will **** off all the conspiracy kooks
if you keep it up. :O|

In article ,
on 14 Mar 2006 18:02:06 GMT,
Laurence Doering attempted to say .....

On Fri, 10 Mar 2006 23:15:27 -0500, Scott M. Kozel wrote:
"Wake UP!" wrote:

Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm

That most likely is melting aluminum. It has been said to be likely
that aircraft wreckage piled up in that corner of the South Tower.

You don't even need aircraft wreckage for aluminum to have been
the source of the sparks and apparently molten material. The
external metal sheathing on the World Trade Center towers was
an aluminum alloy [1].

Aluminum's melting point is around 1,200 degrees F, a temperature
that's easily reached in building fires.

Add the tons of material in office partitions and furniture. Not to mention the
plastics.


--
When dealing with propaganda terminology one sometimes always speaks in
variable absolutes. This is not to be mistaken for an unbiased slant.

In article ,
"Wake UP!" wrote:

http://www.checktheevidence.com/911/Thermite.htm


Well -- it looks to me like a runaway fire in the building, and escaping
to the outside. Thermite burns white The fire shown is red/yellow. There
was plenty of material in WTC to burn at all kinds of spectra --
aluminum, magnesium, titanium all burn uncontrollably in aircraft
crashes.

Wake UP! wrote:
Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm



Also see Prof Jones updated paper (version 5.4)
http://www.physics.byu.edu/research/energy/htm7.html


Scholars for 9/11 Truth
http://st911.org

"Truth" is back under yet another name. Watch for demands for
scientific evidence, vulgarity etc.

Dan, U.S. Air Force, retired

"Wake UP!" wrote in message
...
Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm


I've seen and used thermite and thats not it, by the way you are
aware that thermite isnt used to demolish buildings arent you ?

Keith

Keith W wrote:
"Wake UP!" wrote in message
...
Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm


I've seen and used thermite and thats not it, by the way you are
aware that thermite isnt used to demolish buildings arent you ?

Keith



I told him that a few weeks ago.

Dan, U.S. Air Force, retired