If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Valid OLC log out of SN-10b
I cannot get a valid OLC flight out of my SN-10b. I purchased the glider a
few months ago, have flown a few flights and all are invalid on OLC. Prior to download the SN-10 security routine runs and approves the file. OLC tells me the file error message on his end says Signature Missmatch and he believes that it is a software issue, recommending me to get the original software that came with the SN-10, install it and try again. Unfortunately I don't think I can do that, bought a used glider with the SN-10 already installed. All of the SN-10 data transfer utilities I'm using for the SN-10 I downloaded off the internet, pasted it onto the club laptop that I use to download. So my question is, does anyone have a similar experience with their SN-10b? Is it possible that I need to download the software off the internet onto the actual computer I use for downloading? Will loading the software differently somehow help? Anything else that it might be? Thanks for any help, Kestrel #33 OZ (yes it flies again) |
#2
|
|||
|
|||
Valid OLC log out of SN-10b
Hi Jim,
Check to see what firmware version the SN10b is running. If it is not version 2.31 you can get a free upgrade he http://www.ilec-gmbh.com/software.htm That is likely to fix the problem. Paul Remde Cumulus Soaring, Inc. http://www.cumulus-soaring.com "Jim Archer" wrote in message ... I cannot get a valid OLC flight out of my SN-10b. I purchased the glider a few months ago, have flown a few flights and all are invalid on OLC. Prior to download the SN-10 security routine runs and approves the file. OLC tells me the file error message on his end says Signature Missmatch and he believes that it is a software issue, recommending me to get the original software that came with the SN-10, install it and try again. Unfortunately I don't think I can do that, bought a used glider with the SN-10 already installed. All of the SN-10 data transfer utilities I'm using for the SN-10 I downloaded off the internet, pasted it onto the club laptop that I use to download. So my question is, does anyone have a similar experience with their SN-10b? Is it possible that I need to download the software off the internet onto the actual computer I use for downloading? Will loading the software differently somehow help? Anything else that it might be? Thanks for any help, Kestrel #33 OZ (yes it flies again) |
#3
|
|||
|
|||
Valid OLC log out of SN-10b
Thanks Paul, I am in the middle of doing that right now, I was running
2.22... At 11:39 11 June 2008, Paul Remde wrote: Hi Jim, Check to see what firmware version the SN10b is running. If it is not version 2.31 you can get a free upgrade he http://www.ilec-gmbh.com/software.htm That is likely to fix the problem. Paul Remde Cumulus Soaring, Inc. http://www.cumulus-soaring.com "Jim Archer" wrote in message ... I cannot get a valid OLC flight out of my SN-10b. I purchased the glider a few months ago, have flown a few flights and all are invalid on OLC. Prior to download the SN-10 security routine runs and approves the file. OLC tells me the file error message on his end says Signature Missmatch and he believes that it is a software issue, recommending me to get the original software that came with the SN-10, install it and try again. Unfortunately I don't think I can do that, bought a used glider with the SN-10 already installed. All of the SN-10 data transfer utilities I'm using for the SN-10 I downloaded off the internet, pasted it onto the club laptop that I use to download. So my question is, does anyone have a similar experience with their SN-10b? Is it possible that I need to download the software off the internet onto the actual computer I use for downloading? Will loading the software differently somehow help? Anything else that it might be? Thanks for any help, Kestrel #33 OZ (yes it flies again) |
#4
|
|||
|
|||
Valid OLC log out of SN-10b
Thanks Paul, I am in the middle of doing that right now, I was running
2.22... At 11:39 11 June 2008, Paul Remde wrote: Hi Jim, Check to see what firmware version the SN10b is running. If it is not version 2.31 you can get a free upgrade he http://www.ilec-gmbh.com/software.htm That is likely to fix the problem. Paul Remde Cumulus Soaring, Inc. http://www.cumulus-soaring.com "Jim Archer" wrote in message ... I cannot get a valid OLC flight out of my SN-10b. I purchased the glider a few months ago, have flown a few flights and all are invalid on OLC. Prior to download the SN-10 security routine runs and approves the file. OLC tells me the file error message on his end says Signature Missmatch and he believes that it is a software issue, recommending me to get the original software that came with the SN-10, install it and try again. Unfortunately I don't think I can do that, bought a used glider with the SN-10 already installed. All of the SN-10 data transfer utilities I'm using for the SN-10 I downloaded off the internet, pasted it onto the club laptop that I use to download. So my question is, does anyone have a similar experience with their SN-10b? Is it possible that I need to download the software off the internet onto the actual computer I use for downloading? Will loading the software differently somehow help? Anything else that it might be? Thanks for any help, Kestrel #33 OZ (yes it flies again) |
#5
|
|||
|
|||
Valid OLC log out of SN-10b
On Jun 11, 1:43 am, Jim Archer wrote:
I cannot get a valid OLC flight out of my SN-10b. I purchased the glider a few months ago, have flown a few flights and all are invalid on OLC. Prior to download the SN-10 security routine runs and approves the file. OLC tells me the file error message on his end says Signature Missmatch and he believes that it is a software issue, recommending me to get the original software that came with the SN-10, install it and try again. Unfortunately I don't think I can do that, bought a used glider with the SN-10 already installed. All of the SN-10 data transfer utilities I'm using for the SN-10 I downloaded off the internet, pasted it onto the club laptop that I use to download. So my question is, does anyone have a similar experience with their SN-10b? Is it possible that I need to download the software off the internet onto the actual computer I use for downloading? Will loading the software differently somehow help? Anything else that it might be? Thanks for any help, Kestrel #33 OZ (yes it flies again) The ILEC SN10 is not an IGC-approved secure logger, so you will not get a "green smiley" on OLC for a log produced by an ILEC SN10. The flights are not "invalid", they are just at a "different security level". See: http://www.onlinecontest.org/olc-2.0..._jsp=rules_olc for an explanation. If you are having a problem different than this, please post (or contact me) a more precise discussion of the issue you see... Hope this helps, Best Regards, Dave "YO electric" |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LX20-Secret Key Not Valid! | Ken Ward | Soaring | 6 | April 29th 06 08:22 PM |
Enroute charts valid for use in Canada? | Andrew Sarangan | Instrument Flight Rules | 3 | June 3rd 04 06:34 PM |
Airworthiness Cert Still Valid? | Carl Orton | Owning | 12 | February 13th 04 10:21 PM |