If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
LX9070 Flarm not speaking
Have a LX9070 and a PowerFlarm brick. The PF is turning on can see the red light when new software was loaded and can see a green light when it is on.. There are connections from Flarm to the LX9070 they appear solid, but when I go to the setup page on the LX9070, Hardware then Flarm all I see is a baud rate of 19200 and Ext.(PC). The Freq (should be North America, is blank) serial number and Version are blank. I did have another pilot say my Flarm was working as he got a Flarm warning, but I am not sure it was the Flarm or the transponder setting off his Flarm. I receive no data of the LX9070.
Does anyone know if there are other settings that would keep the Flarm from showing on the LX9070. As stated above all the indications are the Flarm is powering on. Any help would be appreciated. Kind regards, Jon |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LX9070 settings | Jonathan St. Cloud | Soaring | 1 | May 18th 16 06:24 AM |
Lx9070 V80 and Butterfly electronic and pnuemantic compensation | Jonathan St. Cloud | Soaring | 2 | May 5th 16 06:47 PM |
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie | Michael Marshall[_2_] | Soaring | 3 | April 10th 16 04:13 AM |
trying to work out how you connect the flarm view 57 to mini box flarm running a V7 and Oudie | Michael Marshall[_2_] | Soaring | 0 | April 8th 16 08:57 PM |
Information for all users of Flarm, OEM FLARM supplier and Flarm PowerFlarm | [email protected] | Soaring | 28 | March 12th 16 04:31 AM |