If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Rotation
"Mxsmanic" wrote in message Do real aircraft abruptly pitch upward on take-off during rotation, Large jets seem to do the same thing, but at a slower speed. Almost every aircraft I've flown has required nose down trim after takeoff. Not abruptly, not drastically, but promptly after takeoff, as the craft accelerates and you transition to climb, you always have to trim it down. |
#12
|
|||
|
|||
Rotation
Another thing to consider in real aircraft is a plane trimmed for takeoff for forward CG limit while the CG is loaded close to the aft limit. The plane can be noticeablly more pitch sensitive during takeoff. The cure is to trim to the forward edge of normal take off trim setting, and prepare for a light yoke force needed for rotation. Robert M. Gary wrote: Only if its out of trim. |
#13
|
|||
|
|||
Rotation
buttman wrote:
Anyways, whats with the trend around here amongst the "regulars" to be so condescending when dealing with people of lesser knowledge? Msxmanic, in his introductory posts here, put forth several aviation-specific claims, such as "the majority of airplane accidents are caused by poor communication," then, when repeatedly questioned about these claims, failed to provide any evidence whatsoever. Tom provided the thread titles. If you are interested go to Google groups and form your own first impressions of this individual's posting style. -- Peter |
#14
|
|||
|
|||
Rotation
Robert M. Gary writes:
Only if its out of trim. Make sure you are trimmed for take off and the elevator is neurtral. Not sure how you do that in MSFS though, in a real plane you let it go where it wants to go (which is based on the trim). MSFS will let me adjust trim. How do I find out how to trim for take-off? -- Transpose mxsmanic and gmail to reach me by e-mail. |
#15
|
|||
|
|||
Rotation
"Jim Macklin" writes:
The top of the line simulators can be made to fly just like the real thing, because the software and hardware is top line. Your desktop PC based training device uses consumer grade mechanical parts. The joystick works very well once the plane is in the air, so the problem is unrelated to any deficiency of the joystick. -- Transpose mxsmanic and gmail to reach me by e-mail. |
#16
|
|||
|
|||
Rotation
Mike Rapoport writes:
Depends on where you have the trim set which is always a compromise. If the trim is set so that there is no nose down trimming required after takeoff, then it will take quite a bit of pull to get the aircraft to rotate and in the initial climb. If the aircraft is trimmed so that only a moderate amount of force is required to rotate then it will require pushing on the yoke and retrimming after takeoff as the airplane accelerates. The trim setting is correct for one speed and configuration (power and flap) and since the airplane is accelerating, the trim is going to need to be changed. I've been leaving the trim neutral. Rotation is sluggish up to a certain speed, then the plane pitches up rapidly if I try to rotate beyond that speed. Thereafter, I must push on the stick to keep the pitch angle within reason. I take it that I should trim to hold the nose down a bit? It just surprises me that the plane pitches up so quickly (particularly the Baron 58). If I know it's going to do this, I can adjust the stick as soon as the nose rises, but I was wondering if the real aircraft would behave in the same way. I don't see small planes taking off like that when I observe them from a distance. -- Transpose mxsmanic and gmail to reach me by e-mail. |
#17
|
|||
|
|||
Rotation
Robert M. Gary writes:
I think trim is just academic is MSFS because there is no control feedback. You don't need control feedback to see the response of the aircraft out the window and with the instruments, although you can get it with a force-feedback joystick. It is true that anything that requires gradual control inputs or depends on a sensation of motion or other physical feedback is difficult to simulate without advanced hardware. The OP is probably setting the elevator with too much back pressure but doesn't know it because he doesn't have the feedback. Honestly, if you asked me what position the yoke is in on take off, I probably couldn't tell you. In real life we expect the yoke to go to its trim position, something that doesn't make sense in a simulator that does not have feedback controls. You're saying the yoke moves on its own? -- Transpose mxsmanic and gmail to reach me by e-mail. |
#18
|
|||
|
|||
Rotation
John Gaquin writes:
Almost every aircraft I've flown has required nose down trim after takeoff. Not abruptly, not drastically, but promptly after takeoff, as the craft accelerates and you transition to climb, you always have to trim it down. I'll try this. In the past, I haven't used trim much. -- Transpose mxsmanic and gmail to reach me by e-mail. |
#19
|
|||
|
|||
Rotation
"Mxsmanic" wrote in message You're saying the yoke moves on its own? In an actual aircraft, yes -- in a manner of speaking. At a point on the takeoff roll prior to actual takeoff, the elevator (or stabilator) starts to "fly"when it acquires enough airflow to force a response. When that happens, the yoke will move from wherever it was (usually full down in small planes with manual controls) to whatever position is defined as neutral for that particular speed, as determined by the trim tab setting. |
#20
|
|||
|
|||
Rotation
John Gaquin writes:
In an actual aircraft, yes -- in a manner of speaking. At a point on the takeoff roll prior to actual takeoff, the elevator (or stabilator) starts to "fly"when it acquires enough airflow to force a response. When that happens, the yoke will move from wherever it was (usually full down in small planes with manual controls) to whatever position is defined as neutral for that particular speed, as determined by the trim tab setting. That seems logical. Unfortunately my joystick has only springs for feedback, and that feedback is fixed. However, I do notice a change in the view out the window and sometimes the artificial horizon as speed increases, if I have the stick substantially forward or backward, so the effects are indeed being simulated, even if I can't feel them. I suppose force-feedback might help, but I don't know how reliable or durable those are, and they can be expensive (and they are hard to find). -- Transpose mxsmanic and gmail to reach me by e-mail. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The danger of assumption | Jay Honeck | Piloting | 26 | September 15th 05 12:37 PM |
Thermal Rotation - Revisited.... | Mark Zivley | Soaring | 3 | July 3rd 04 02:11 PM |
Fighter takeoff rotation | Boomer | Military Aviation | 10 | March 17th 04 06:43 PM |
Cessna 150 Price Outlook | Charles Talleyrand | Owning | 80 | October 16th 03 02:18 PM |
Airmen in Europe may go back to three-month rotation schedules | Otis Willie | Military Aviation | 0 | August 22nd 03 11:47 PM |