A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Dynon EFIS-D10 Any Pireps or Opinion?



 
 
Thread Tools Display Modes
  #1  
Old March 24th 04, 05:22 PM
Gig Giacona
external usenet poster
 
Posts: n/a
Default Dynon EFIS-D10 Any Pireps or Opinion?

I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR



  #2  
Old March 25th 04, 12:07 AM
Paul Lee
external usenet poster
 
Posts: n/a
Default

I have one. Best bang for the buck. Haven't flown it yet, just got
my airworthiness. EFIS-D10 is neither VFR nor IFR, you need the functions
it has for flying anyway. I use Garmin 300XL, with NARCO 122D/GPS/VOR/LOC/GS
for IFR NAV. If you are watching the pennies, and thinking IFR,
why not get a IFR rated panel GPS and save the grand on G 196?

"Gig Giacona" wrote in message ...
I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR

  #3  
Old March 25th 04, 01:01 AM
Blueskies
external usenet poster
 
Posts: n/a
Default

How much for database updates?

--
Dan D.



..
"Paul Lee" wrote in message om...
I have one. Best bang for the buck. Haven't flown it yet, just got
my airworthiness. EFIS-D10 is neither VFR nor IFR, you need the functions
it has for flying anyway. I use Garmin 300XL, with NARCO 122D/GPS/VOR/LOC/GS
for IFR NAV. If you are watching the pennies, and thinking IFR,
why not get a IFR rated panel GPS and save the grand on G 196?

"Gig Giacona" wrote in message ...
I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR



  #4  
Old March 25th 04, 03:01 PM
Gig Giacona
external usenet poster
 
Posts: n/a
Default

If I decide to go IFR I would also add further backup for the Dynon. I
didn't mention but also in the VFR version I'd have a Nav/Com.

I guess my real questions should have been. Has anybody used the Dynon and
would you trust the "Panel" screen of the Garmin 196/296 to get you on the
ground at night VFR in case of emergency?

GigG



"Paul Lee" wrote in message
om...
I have one. Best bang for the buck. Haven't flown it yet, just got
my airworthiness. EFIS-D10 is neither VFR nor IFR, you need the functions
it has for flying anyway. I use Garmin 300XL, with NARCO

122D/GPS/VOR/LOC/GS
for IFR NAV. If you are watching the pennies, and thinking IFR,
why not get a IFR rated panel GPS and save the grand on G 196?

"Gig Giacona" wrote in message

...
I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment

I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in

VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR



  #5  
Old March 26th 04, 12:58 AM
Charlie England
external usenet poster
 
Posts: n/a
Default

Gig Giacona wrote:
I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR




Go to:

http://www.matronics.com/search

& search for 'Dynon' and/or 'D10'.

Several RV-x drivers have been flying them since they were released.

Charlie

  #6  
Old March 26th 04, 02:34 AM
Paul Lee
external usenet poster
 
Posts: n/a
Default

The EFIS-D10 or the Garmin 300XL?
The software updates for the EFIS-D10 are free from their website.
Garmin 300XL DB is $625.00 per year directly from Jeppesen.
But I am not doing IFR yet - plan to in the future.

---------------------------------------------------
Paul Lee. SQ2000 canard project www.abri.com/sq2000

"Blueskies" wrote in message gy.com...
How much for database updates?

--
Dan D.



.
"Paul Lee" wrote in message om...
I have one. Best bang for the buck. Haven't flown it yet, just got
my airworthiness. EFIS-D10 is neither VFR nor IFR, you need the functions
it has for flying anyway. I use Garmin 300XL, with NARCO 122D/GPS/VOR/LOC/GS
for IFR NAV. If you are watching the pennies, and thinking IFR,
why not get a IFR rated panel GPS and save the grand on G 196?

  #7  
Old March 26th 04, 02:44 AM
Joe Dubner
external usenet poster
 
Posts: n/a
Default

GigG,

I have a Garmin GPS196 in my Long-EZ and am almost finished with the
installation of a Dynon EFIS. My Long is day/VFR only; no vacuum
instruments and darn few lights. My intention is to use the EFIS to
enhance my night-flying ability (takeoff before dawn, land after dark,
etc.) and give me some sort of option if I find myself over an overcast
at the home drome or need to do a quick 180. I have enough IMC
experience to know that needle-ball-and-airspeed is an emergency
procedure for me. An attitude indicator, on the other hand, is a
different story.

I've only heard on one GPS196 owner who finds the "Panel" screen useful.
I think it's just a gimmick to sell units; I decided I'd rather have
the HSI and moving map display at all times. I'm not convinced the
Panel screen would do me any good unless I practiced with it and stayed
current (like any instrument flying). I surely don't expect to page
over to it and recover from IMC especially when a little spatial
disorientation is thrown in. OTOH, I bet I can keep the wings level and
maintain altitude for a long enough period of time to reach VMC with
reference to the attitude indicator on the EFIS :-)

--
Joe
Long-EZ 821RP
Clarkston, WA


On 25-Mar-04 07:01 Gig Giacona wrote:

If I decide to go IFR I would also add further backup for the Dynon. I
didn't mention but also in the VFR version I'd have a Nav/Com.

I guess my real questions should have been. Has anybody used the Dynon and
would you trust the "Panel" screen of the Garmin 196/296 to get you on the
ground at night VFR in case of emergency?

GigG



"Paul Lee" wrote in message
om...
I have one. Best bang for the buck. Haven't flown it yet, just got
my airworthiness. EFIS-D10 is neither VFR nor IFR, you need the functions
it has for flying anyway. I use Garmin 300XL, with NARCO

122D/GPS/VOR/LOC/GS
for IFR NAV. If you are watching the pennies, and thinking IFR,
why not get a IFR rated panel GPS and save the grand on G 196?

"Gig Giacona" wrote in message

...
I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment

I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in

VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR



  #8  
Old May 22nd 05, 02:58 AM
Kent Ashton
external usenet poster
 
Posts: n/a
Default

Had the orginal D-10 in a Cozy. Nice unit except I couldn't get the heading
function to settle down and indicate heading accurately. Later sold the
airplane to another guy (not because of the Dynon) who likes the Dynon. He
upgraded to D-10A and bought the remote heading sensor. Says the heading is
fine now and he likes it (I did too). He's installing their engine monitor,
now.
--kent

From: "Gig Giacona"
Organization: Posted via Supernews, http://www.supernews.com
Newsgroups: rec.aviation.homebuilt
Date: Wed, 24 Mar 2004 11:22:04 -0600
Subject: Dynon EFIS-D10 Any Pireps or Opinion?

I building a Zenith 601XL I'm wavering between a minimal IFR panel and a
nice VFR Cross Country panel. Setting the IFR panel aside for a moment I'm
considering a Dynon EFIS-D10 and a Garmin 196/296. My thought is that in VMC
the "panel" display on the Garmin could act as a back-up for the Dynon.

GigG

www.peoamerica.net/N601WR




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.