A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Oxygen regulator for MH EDS



 
 
Thread Tools Display Modes
  #1  
Old September 14th 18, 04:51 PM posted to rec.aviation.soaring
John Foster
external usenet poster
 
Posts: 75
Default Oxygen regulator for MH EDS

Does anyone know the specifics of what kind of regulator is used with the Older MH EDS systems? I’ve been given an older EDS unit but will have to buy a separate oxygen bottle and regulator.
Ads
  #2  
Old September 14th 18, 05:01 PM posted to rec.aviation.soaring
Dan Marotta
external usenet poster
 
Posts: 3,231
Default Oxygen regulator for MH EDS

Check out the Mountain High website http://www.mhoxygen.com/.
Everything you need should be there.

On 9/14/2018 9:51 AM, John Foster wrote:
Does anyone know the specifics of what kind of regulator is used with the Older MH EDS systems? I’ve been given an older EDS unit but will have to buy a separate oxygen bottle and regulator.


--
Dan, 5J

  #3  
Old September 14th 18, 06:40 PM posted to rec.aviation.soaring
JS[_5_]
external usenet poster
 
Posts: 295
Default Oxygen regulator for MH EDS

On Friday, September 14, 2018 at 8:51:18 AM UTC-7, John Foster wrote:
Does anyone know the specifics of what kind of regulator is used with the Older MH EDS systems? I’ve been given an older EDS unit but will have to buy a separate oxygen bottle and regulator.


I have flown a glider with a Nelson (adjustable) regulator, with the pressure dialed down to the specs (that were, may still be) on the MH website.
But there's a reason the old ones are being given away. Perhaps use it as trade in on a new complete system.
Jim
  #4  
Old September 14th 18, 09:18 PM posted to rec.aviation.soaring
Tim Taylor
external usenet poster
 
Posts: 634
Default Oxygen regulator for MH EDS

From the MH webpage for XCR regulators:

Inlet Pressure Rating:
2400 PSI MAX
Regulated Outlet:
16 ± 2 PSI (Dynamic) (NOM 1 Bar)
20 ± 2 PSI (Static)

  #5  
Old September 14th 18, 11:32 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 185
Default Oxygen regulator for MH EDS

I was using a nelson regulator and sent the entire O2D1 system back to mountain high a few years ago when they offered a free upgrade and checkout. Interestingly the found that the nelson regulator changed its output by more then 15 psi as the o2 bottle got low, and not they way you would think. It got higher as the pressure got lower. I had set it with a full bottle at 20Psi and was up to 30 psi at 500psi in the bottle.

CH
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Mountain High Oxygen Regulator ZZ Soaring 1 March 7th 10 04:58 PM
FS Cambridge Mk IV Variometer and Oxygen Regulator [email protected] Soaring 1 January 20th 09 04:07 AM
For Sale: A8A oxygen regulator GM Soaring 1 December 11th 07 02:29 AM
Oxygen- EasyPulse 5 conserving regulator? Dan Youngquist Owning 14 October 1st 06 02:36 AM
Oxygen regulator Roger Fowler Soaring 3 December 26th 05 11:29 AM


All times are GMT +1. The time now is 08:30 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 AviationBanter.
The comments are property of their posters.