A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Harbor Freight aircraft tools



 
 
Thread Tools Display Modes
  #1  
Old August 8th 08, 04:34 PM posted to rec.aviation.homebuilt
wright1902glider
external usenet poster
 
Posts: 132
Default Harbor Freight aircraft tools

For me, the ultimate problem with HF is that they seldom have the
stuff
they advertise. We have a local store (meaning about a 25 mile drive
each way) & the hit rate for sale items is about 1 in 10.

Charlie- Hide quoted text -

- Show quoted text -



I'm 1/2 way between 2 stores. My strategy is the same I used for toys
when I was a kid: circle all of the stuff in the catalog(s) that I
want. Develop budget limit for this trip. Find as many items on list
as possible. Consume remaining budget on c-clamps and specialty
pliers. A man can never have enough clamps or bent-end-long-reach-
needle-nose-internal-snap-ring pliers.

By the way, I highly recommend the 20ft. 1,000lb capacity yellow
ratchet tie-down straps. They are better than the ones at home cheap-o
and I got mine for $1.99 each. (I bought 1 to use and 3 spares.)

Harry

  #2  
Old August 8th 08, 05:02 PM posted to rec.aviation.homebuilt
Copperhead144
external usenet poster
 
Posts: 17
Default Harbor Freight aircraft tools

On Aug 8, 10:34*am, wright1902glider wrote:
For me, the ultimate problem with HF is that they seldom have the
stuff

they advertise. We have a local store (meaning about a 25 mile drive
each way) & the hit rate for sale items is about 1 in 10.


Charlie- Hide quoted text -


- Show quoted text -


I'm 1/2 way between 2 stores. My strategy is the same I used for toys
when I was a kid: circle all of the stuff in the catalog(s) that I
want. Develop budget limit for this trip. Find as many items on list
as possible. Consume remaining budget on c-clamps and specialty
pliers. A man can never have enough clamps or bent-end-long-reach-
needle-nose-internal-snap-ring pliers.

By the way, I highly recommend the 20ft. 1,000lb capacity yellow
ratchet tie-down straps. They are better than the ones at home cheap-o
and I got mine for $1.99 each. (I bought 1 to use and 3 spares.)

Harry


Harry,

You made me choke on my coffee laughing when I read this because its
the very same thing I do. We have one HF store in town bit other's
within an easy driving distance so I keep a copy of the catalog flyer
with me and when in the area stop by one of the stores to see if they
have the item I'm looking for in stock. I also set aside the money I
intend to spend on said tool and wait until I find it. Works fine and
I don't overspend.

Joe
  #3  
Old August 8th 08, 11:00 PM posted to rec.aviation.homebuilt
Andy Asberry[_2_]
external usenet poster
 
Posts: 25
Default Harbor Freight aircraft tools

On Fri, 8 Aug 2008 08:34:53 -0700 (PDT), wright1902glider
wrote:

For me, the ultimate problem with HF is that they seldom have the
stuff
they advertise. We have a local store (meaning about a 25 mile drive
each way) & the hit rate for sale items is about 1 in 10.

Charlie- Hide quoted text -

- Show quoted text -



I'm 1/2 way between 2 stores. My strategy is the same I used for toys
when I was a kid: circle all of the stuff in the catalog(s) that I
want. Develop budget limit for this trip. Find as many items on list
as possible. Consume remaining budget on c-clamps and specialty
pliers. A man can never have enough clamps or bent-end-long-reach-
needle-nose-internal-snap-ring pliers.

By the way, I highly recommend the 20ft. 1,000lb capacity yellow
ratchet tie-down straps. They are better than the ones at home cheap-o
and I got mine for $1.99 each. (I bought 1 to use and 3 spares.)

Harry


Don't leave them in the sun. I used a couple on a three week trip.
When I got home, I could pull them in two with my hands.

--Andy Asberry--
------Texas-----
  #4  
Old August 9th 08, 12:20 AM posted to rec.aviation.homebuilt
Stuart & Kathryn Fields
external usenet poster
 
Posts: 328
Default Harbor Freight aircraft tools


"Andy Asberry" wrote in message
...
On Fri, 8 Aug 2008 08:34:53 -0700 (PDT), wright1902glider
wrote:

For me, the ultimate problem with HF is that they seldom have the
stuff
they advertise. We have a local store (meaning about a 25 mile drive
each way) & the hit rate for sale items is about 1 in 10.

Charlie- Hide quoted text -

- Show quoted text -



I'm 1/2 way between 2 stores. My strategy is the same I used for toys
when I was a kid: circle all of the stuff in the catalog(s) that I
want. Develop budget limit for this trip. Find as many items on list
as possible. Consume remaining budget on c-clamps and specialty
pliers. A man can never have enough clamps or bent-end-long-reach-
needle-nose-internal-snap-ring pliers.

By the way, I highly recommend the 20ft. 1,000lb capacity yellow
ratchet tie-down straps. They are better than the ones at home cheap-o
and I got mine for $1.99 each. (I bought 1 to use and 3 spares.)

Harry


Don't leave them in the sun. I used a couple on a three week trip.
When I got home, I could pull them in two with my hands.

--Andy Asberry--
------Texas-----


Andy: remind me not to disagree with you. I've been using some of those
for several years and I can't bust them with my hands. Whatever is in your
diet let me know and maybe you should cut back a bit.
Stu


  #5  
Old August 9th 08, 05:54 AM posted to rec.aviation.homebuilt
Andy Asberry[_2_]
external usenet poster
 
Posts: 25
Default Harbor Freight aircraft tools

On Fri, 8 Aug 2008 16:20:33 -0700, "Stuart & Kathryn Fields"
wrote:


"Andy Asberry" wrote in message
.. .



Don't leave them in the sun. I used a couple on a three week trip.
When I got home, I could pull them in two with my hands.

--Andy Asberry--
------Texas-----


Andy: remind me not to disagree with you. I've been using some of those
for several years and I can't bust them with my hands. Whatever is in your
diet let me know and maybe you should cut back a bit.
Stu


No Herculean strength here. I will add to my statement. Mine are red
not yellow and they were exposed for the 3 weeks plus a week after
returning. I had simply looped it around the axle of my garden tractor
to pull it up to the trailer ramps. Almost turned to powder. Broke it
several more times just to see if the whole length was rotten.

--Andy Asberry--
------Texas-----
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
CAD Tools For Aircraft Design Le Chaud Lapin Piloting 9 September 26th 07 01:47 PM
LA Times : Freight Dogs G Farris Instrument Flight Rules 1 January 13th 05 12:02 PM
Freight Dogs Dennis O'Connor Piloting 6 January 29th 04 02:37 AM
Air liner (air freight) hit by MANPAD Token Military Aviation 24 December 2nd 03 04:36 AM


All times are GMT +1. The time now is 10:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.