A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Chewed-up coupling connector - How-to?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old July 13th 03, 01:02 PM
Michael Horowitz
external usenet poster
 
Posts: n/a
Default Chewed-up coupling connector - How-to?

Folks - The oil pressure sensor/tube is secured to the engine block of
my A-65 by a brass connector which is getting pretty chewed up; Over
the years previous owners apparently using something other than the
correct tool to tighten it down.

I'm told (please correct me if my understanding is incorrect) one has
to replace the sensor and gauge in order to replace that connector.

Any suggestions on how to improve the lifespan of that brass
connector? - Mike
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:34 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.