Baby Grob Canopy Needed

Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.

Burkhart Grob G-102 ClubAstir III D Serial 5640CB

Any leads are appreciated.

Ron Gregg
Southern California Soaring Academy
+1 (661) 944-1090


--
To email, replace contestid with the real thing. (spelled out)

There is or was a company in Los Alamitos, near Long Beach that would
mold (or blow if desired) a canopy. If the old canopy is not
destroyed, it can serve to make a mold. The prices were reasonable and
good quality. I hope they are still in business.
Aircraft Windshield Co.



Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.


Any leads are appreciated.

On Mar 2, 8:09*am, Alpha One wrote:
Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.

Burkhart Grob G-102 ClubAstir III D Serial 5640CB

Any leads are appreciated.

Ron Gregg
Southern California Soaring Academy
+1 (661) 944-1090

--
To email, replace contestid with the real thing. (spelled out)

I believe Robert Mudd at Moriarty is the Grob representative in the
states.
Robert J. Mudd
505 269-8234
robertmudd1u (AT) aol (DOT) com

There is also a Yahoo 'Group' for Grob Sailplanes that might provide
some leads.

Are you looking for a complete canopy or just the Plexiglas?

On Mar 2, 8:09*am, Alpha One wrote:
Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.

Burkhart Grob G-102 ClubAstir III D Serial 5640CB

Any leads are appreciated.

Ron Gregg
Southern California Soaring Academy
+1 (661) 944-1090

--
To email, replace contestid with the real thing. (spelled out)

Contact ThermoTecUSA in California. High quality replacement canopies www.thermotecusa.com


"Alpha One" wrote in message news:2010030208095275249-contestid@contestidus...


Southern California Soaring Academy near Los Angeles, CA, USA is looking for a canopy for a Baby Grob.



Burkhart Grob G-102 ClubAstir III D Serial 5640CB



Any leads are appreciated.



Ron Gregg

Southern California Soaring Academy

+1 (661) 944-1090





--

To email, replace contestid with the real thing. (spelled out)

Just the Plexiglas.

On 2010-03-03 02:00:54 -0800, Hagbard Celine said:

Are you looking for a complete canopy or just the Plexiglas?

On Mar 2, 8:09*am, Alpha One wrote:
Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.

Burkhart Grob G-102 ClubAstir III D Serial 5640CB

Any leads are appreciated.

Ron Gregg
Southern California Soaring Academy
+1 (661) 944-1090

--
To email, replace contestid with the real thing. (spelled out)


--
To email, replace contestid with the real thing. (spelled out)

On Mar 3, 7:33*am, Alpha One wrote:
Just the Plexiglas.

On 2010-03-03 02:00:54 -0800, Hagbard Celine said:





Are you looking for a complete canopy or just the Plexiglas?

On Mar 2, 8:09 am, Alpha One wrote:
Southern California Soaring Academy near Los Angeles, CA, USA is
looking for a canopy for a Baby Grob.

Burkhart Grob G-102 ClubAstir III D Serial 5640CB

Any leads are appreciated.

Ron Gregg
Southern California Soaring Academy
+1 (661) 944-1090

--
To email, replace contestid with the real thing. (spelled out)

--
To email, replace contestid with the real thing. (spelled out)- Hide quoted text -

- Show quoted text -

I have had a very good experience with Cee Bailey in LA - $319 for a
tinted canopy for a 1-26 WITH CERTS.

Y'all know an aftermarket canopy without certs is not legal if parts
from the Mfg are available right?

Understood.

On 2010-03-03 08:03:55 -0800, said:

I have had a very good experience with Cee Bailey in LA - $319 for a
tinted canopy for a 1-26 WITH CERTS.

Y'all know an aftermarket canopy without certs is not legal if parts
from the Mfg are available right?


--
To email, replace contestid with the real thing. (spelled out)

On Mar 3, 8:03*am, wrote:

Y'all know an aftermarket canopy without certs is not legal if parts
from the Mfg are available right?

I am quite sure that a replacement canopy could be manufactured by the
owner of the aircraft for their particular aircraft as allowed by
14CFR§21.303(b)2. The required owner's participation in the
manufacture could be as simple as telling Ray or Judy or whoever "use
aircraft grade acrylic of thus and such thickness and make the profile
match that indicated by these broken pieces." Once that's done, all
you need to do is find an A&P who will install the transparency and
sign for it.

Here's a great Don Dodge article on 14CFR§21.303(b)2 on the Web. It
describes the process and offers a cautionary tale:

http://150cessna.tripod.com/parts.html

Thanks, Bob K.

Thanks for the link. I am learning something.

Ron Gregg


On 2010-03-03 16:30:48 -0800, Bob Kuykendall said:

Here's a great Don Dodge article on 14CFR§21.303(b)2 on the Web. It
describes the process and offers a cautionary tale:


--
To email, replace contestid with the real thing. (spelled out)