If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Ventus ballast leak
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote:
Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Hi, I want to do the repair myself as I'm qualified - that way I can save some $ and gain some experience. But it would nevertheless be good with some input from people who have already done similar repairs. SH told me to follow the Maintenance manual, but in the Maintenance manual (April 1983) they only describe glass fibre repairs. For Carbon parts they say, that one should ask for instruction from the manufacture :-S Thanks MrT |
#2
|
|||
|
|||
Ventus ballast leak
On Saturday, September 8, 2018 at 10:01:43 AM UTC-6, MrT wrote:
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote: Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Hi, I want to do the repair myself as I'm qualified - that way I can save some $ and gain some experience. But it would nevertheless be good with some input from people who have already done similar repairs. SH told me to follow the Maintenance manual, but in the Maintenance manual (April 1983) they only describe glass fibre repairs. For Carbon parts they say, that one should ask for instruction from the manufacture :-S Thanks MrT I did this on a Mini Nimbus that had carbon skins, under the watchful eye of my A&P. There are some photos of the procedure that may be helpful on the Mini Nimbus Yahoo Group. You will have to join the group for access though. Mike |
#3
|
|||
|
|||
Ventus ballast leak
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote:
Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Thanks Mike :-) I've joined the group, but can't seem to find the pictures. What should I search for? BR, MrT |
#4
|
|||
|
|||
Ventus ballast leak
On Sunday, September 9, 2018 at 2:24:29 AM UTC-6, MrT wrote:
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote: Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Thanks Mike :-) I've joined the group, but can't seem to find the pictures. What should I search for? BR, MrT I am no longer a member, but look for the photo album "N8FZ". Mike |
#5
|
|||
|
|||
Ventus ballast leak
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote:
Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Hi Mike, was that an album in Yahoo photos? cause they were discontinued in 2007. Anyway I can't seem to find the album. BR, MrT |
#6
|
|||
|
|||
Ventus ballast leak
On Thursday, September 13, 2018 at 3:23:58 PM UTC-4, MrT wrote:
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote: Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Hi Mike, was that an album in Yahoo photos? cause they were discontinued in 2007. Anyway I can't seem to find the album. BR, MrT It is likely in the mini-nimbus yahoo group. In there, at the top of the page when you sign in, are links to Messages(Conversations), Photos, Files, About the Group, etc. Click on "Photos" and look for the album he suggested. |
#7
|
|||
|
|||
Ventus ballast leak
On Saturday, October 9, 2010 at 1:21:53 PM UTC+2, wladkummer76 wrote:
Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone Thanks Dan and Mike :-) Found it in the album 'Water ballast repair' from 2012 (Not the N8FZ folder) - Great pictures :-) now i got something to look at. Thanks again!! - BR MrT from Denmark |
#8
|
|||
|
|||
Ventus ballast leak
On Saturday, October 9, 2010 at 7:21:53 AM UTC-4, wladkummer76 wrote:
Hi all, Id like to ask for help here. My Ventus a SN143 right wing ballast is leaking around the ballast valve actuator rod. I've contacted S&H but no response so far. I do not know if a O-ring seal would fit in the small recess. Have anyone in this group experienced this problem? Thanks to everyone I had my first actuator leak at the wing root of my Discus CS just last week. I've already designed, built, and tested a fix that can be made external of the wing. Very simple, but very effective. If you would like a description and a picture, just contact me. If you have a lathe, you can make it yourself; if not, any local machine shop can do the job with a few parts from McMaster Carr. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
C85 Oil Leak | Dick[_1_] | Owning | 2 | May 2nd 07 11:00 PM |
water ballast leak | Robert Harvey | Soaring | 2 | May 27th 05 03:49 PM |
water ballast leak | Robert Harvey | Soaring | 0 | May 26th 05 10:33 PM |
Oil leak | Gene Seibel | Owning | 10 | January 4th 05 02:57 PM |
Oil leak | mike regish | Piloting | 9 | June 22nd 04 03:46 AM |