Ercoupe from Lilliput

for anyone who is actually interested in that, it was sidney Struhl who
designed th eFF model.

There's an online free plan for it here..


http://www.theplanpage.com/Months/28...s/erocoupe.pdf

On Mar 9, 10:39*pm, Bertie the Bunyip wrote:
for anyone who is actually interested in that, it was sidney Struhl who
designed th eFF model.

There's an online free plan for it here..

http://www.theplanpage.com/Months/28..._files/erocoup...

Neat.

Have you ever seen the Minicoupe?

I think it's pretty cool little experimental based on the Ercoupe.
Just needs the rounded vertical stabilizers ... but it does have
rudder pedals (didn't some Ercoupe models have them?). Not many
around, that's for sure. I looked around on the 'Net but saw only one
builder currently doing one.

http://www.theminicoupe.com/_wsn/page2.html

wrote in news:d491c485-9213-4da3-ab5b-
:

On Mar 9, 10:39*pm, Bertie the Bunyip wrote:
for anyone who is actually interested in that, it was sidney Struhl
who
designed th eFF model.

There's an online free plan for it here..

http://www.theplanpage.com/Months/2802/Struhl%
20Ercoupe_files/erocoup...

Neat.

Have you ever seen the Minicoupe?

I think it's pretty cool little experimental based on the Ercoupe.
Just needs the rounded vertical stabilizers ... but it does have
rudder pedals (didn't some Ercoupe models have them?). Not many
around, that's for sure. I looked around on the 'Net but saw only one
builder currently doing one.

http://www.theminicoupe.com/_wsn/page2.html








I saw one on ebay that had been sitting in someone's yard alright. I
remember them when they were new and probably saw one or two floating
around various fly-ins back then, but i don't think it had much to
recommend it except it was probably pretty easy to build. I think it had
conventional controls. If I were going to build a little single seat
putt putt it'd come pretty low on my list, though. I think a Pixie or
baby ace would be a better deal by far. Or even a Volksplane or Hummel
bird.


Bertie

I think a Pixie or
baby ace would be a better deal by far. Or even a Volksplane or Hummel
bird.

Bertie- Hide quoted text -

- Show quoted text -

For a while I was looking at the Volksplane, but I thought metal would
be preferable.

The Hummelbird is neat. Bet you could fly one with a rotax 503 / 582
pretty nice.

Baby ace is neat but for now I'm going with a simpler design. I did
order Poberezny's book on the Acrosport. Soon as I do some aerobatics
I'll decide if long term I want an aerobatic plane like Paul's.

wrote in news:77d15da9-4a1c-4411-be3f-
:

I think a Pixie or
baby ace would be a better deal by far. Or even a Volksplane or
Hummel
bird.

Bertie- Hide quoted text -

- Show quoted text -

For a while I was looking at the Volksplane, but I thought metal would
be preferable.

The Hummelbird is neat. Bet you could fly one with a rotax 503 / 582
pretty nice.

First build? put the engine on the designer intended.

Baby ace is neat but for now I'm going with a simpler design. I did
order Poberezny's book on the Acrosport. Soon as I do some aerobatics
I'll decide if long term I want an aerobatic plane like Paul's.


They don't come any simpler or easier to build than the Volksplane. Good
safe design. A determined builder can knock one up in six months. The
Pietenpol wouldn't be too much harder, but would take a good bit more
time to build. I've always fancied one of those with a model A engine on
it.

Bertie

On Mar 10, 9:29*pm, Bertie the Bunyip wrote:
wrote in news:77d15da9-4a1c-4411-be3f-
:



I think a Pixie or
baby ace would be a better deal by far. Or even a Volksplane or
Hummel
bird.

Bertie- Hide quoted text -

- Show quoted text -

For a while I was looking at the Volksplane, but I thought metal would
be preferable.

The Hummelbird is neat. Bet you could fly one with a rotax 503 / 582
pretty nice.

First build? put the engine on the designer intended.

I think that's a safe way to go. However I like to think about weight
vs. HP and power loading and all of that. Even if you don't do an
alternative its a worthy mental exercise.

They don't come any simpler or easier to build than the Volksplane. Good
safe design. A determined builder can knock one up in six months. The
Pietenpol wouldn't be too much harder, but would take a good bit more
time to build. I've always fancied one of those with a model A engine on
it.

Bertie

I've been putting together the list of parts for the Texas Parasol. A
guy up in Canada has put one together. He told me he estimated that if
he'd had a whole month of free time he could have gotten it to the
point it is now (which is airframe complete sans fabric). He hasn't
done his engine and so probably has a number of such "full time
months" to go. I think their have been reasonable solutions provided
for those who object to its design as drawn.

The plane is fun looking and does enough for a first project. They've
only had one fatality -- poor guy was struggling with his engine all
day, finally got it to start, took it out for a "taxi test". Except he
took off. He wasn't a pilot and had no training whatsoever. He got to
200 feet and ran out of gas with a bad end.

On the other hand one guy has done some basic aerobatics in one
(slightly beefed up version).

They've been flying 'em since the 80s I think. Uses 503, VW, Geo and/
or Suburu as well.

I haven't seen many designs that are this simple. It can be built as
an ultralight, or could, but I won't go for that.