A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Piper 6.00x6 Nose wheel and fork?



 
 
Thread Tools Display Modes
  #1  
Old March 5th 04, 06:37 PM
mikem
external usenet poster
 
Posts: n/a
Default Piper 6.00x6 Nose wheel and fork?

I need some help with Piper part numbers. I'm looking for the
Piper Part numbers of the 6.00x6 nose wheel fork used on the
"heavier" Cherokees, Comanchees, etc.

Jay Honeck and Don Tuite sent reprints of the PA28 manual pages which
show only the 5.00x5 wheel and hardware. Thanks guys.

I have seen Tripacers, Cherokees, Cherokee Sixes, and Comanchees on the
ramp which have a 6.00x6 nose wheel. I would like to get a photo copy of
the parts manual page on any of these aircraft which shows both the
illustration, and the part numbers of the Fork, the wheel axle, spacers,
buckets, and fasteners used on the fork itself.

Does anyone know if Piper supplied the 6.00x6 nose wheel as an option
for PA28s?

Thanks in advance,

Mike Mladejovsky
Skylane '1MM
Pacer '00Z

mgm17160 AT utah.edu

  #2  
Old March 5th 04, 09:22 PM
Jay Masino
external usenet poster
 
Posts: n/a
Default

mikem wrote:

I sent some images to your e-mail account. The 6.00x6 configuration was
FAR more common, so I'm not sure of the problem.

--- Jay



--

__!__
Jay and Teresa Masino ___(_)___
http://www2.ari.net/jmasino ! ! !
http://www.oceancityairport.com
http://www.oc-adolfos.com
  #3  
Old March 6th 04, 08:23 PM
Jay Honeck
external usenet poster
 
Posts: n/a
Default

Jay Honeck and Don Tuite sent reprints of the PA28 manual pages which
show only the 5.00x5 wheel and hardware. Thanks guys.


Sorry, Mike. Those sheets were from the Warrior parts manual -- I don't
have one specifically for the Pathfinder.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Piper 6.00x6 Nose Wheel and Fork? mikem General Aviation 5 March 6th 04 12:34 AM
Looking for Cessna 206 or 310 nose wheel fork mikem Aviation Marketplace 0 October 27th 03 05:33 PM
Looking for Cessna 206 or 310 nose wheel fork mikem Owning 0 October 27th 03 05:33 PM


All times are GMT +1. The time now is 10:39 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.