DG-300 Oxygen Cylinder Size?

Hi All,

I'm purchasing an oxygen system for my DG-300, and I'm not sure which cylinder to buy. Can any owners comment on whether the 5.25" cylinder works? My measurements indicate it will be tight but perhaps will work.

Thanks!

-Dave Kammeyer
XLT

On Thursday, July 5, 2012 8:46:13 AM UTC-7, kammeyer wrote:
Hi All,

I'm purchasing an oxygen system for my DG-300, and I'm not sure which cylinder to buy. Can any owners comment on whether the 5.25" cylinder works? My measurements indicate it will be tight but perhaps will work.

Thanks!

-Dave Kammeyer
XLT

5.25" is what I have and it works
6PK

On Thursday, July 5, 2012 4:14:48 PM UTC-7, 6PK wrote:
On Thursday, July 5, 2012 8:46:13 AM UTC-7, kammeyer wrote:
Hi All,

I'm purchasing an oxygen system for my DG-300, and I'm not sure which cylinder to buy. Can any owners comment on whether the 5.25" cylinder works? My measurements indicate it will be tight but perhaps will work.

Thanks!

-Dave Kammeyer
XLT

5.25" is what I have and it works
6PK
I also use a 5.25" cylinder. It's a snug fit.
H8

Dave -

Sorry I didn't respond to your email earlier, I was out at the US
Nationals... I bought an aluminum "M" sized bottle from Wings &
Wheels and it works in my DG-300 just fine! My DG-300 is an early
serial-number and the "pocket" for the O2 tank is just under 5.5" in
diameter. Later models may have openings for the smaller "D" or "E"
cylinders so I cannot comment on all DG-300/303 models for sure. But
I really like the "M" cylinder I got (5.25" diameter). Combined with
the Mountain High EDS O2D1, it makes for a great setup!

--Noel