If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
Folks,
I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. I already have the stand alone DOS application from SeeYou; that's not what I need. I want the DLL that can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 |
#2
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 16, 3:15*pm, Papa3 wrote:
Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. *I already have the stand alone DOS application from SeeYou; that's not what I need. * I want the DLL that can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" |
#3
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
If you mean can SeeYouMobile with GPS input produce a valid secure IGC
file, the answer is no. Only secure IGC recorders can do that. Even if the GPS input is from an IGC secure recorder, the SeeYou file is not secure, only the flight record from the recorder which must be downloaded using the appropriate software, typically Connectme, free at - http://www.naviter.si/products/connectme.php?Itemid=62 For most recorders (the exceptions being a few pre-Windows older ones) the DLLs for download and verify to use with IGC shell are free download from the FAI/IGC website At 21:08 16 October 2008, DRN wrote: On Oct 16, 3:15=A0pm, Papa3 wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL that can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" |
#4
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 16, 5:08*pm, DRN wrote:
On Oct 16, 3:15*pm, Papa3 wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. *I already have the stand alone DOS application from SeeYou; that's not what I need. * I want the DLL that can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. In so doing, it creates its own proprietary Security Record (G-Record). I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 |
#5
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
At 22:22 16 October 2008, Papa3 wrote:
On Oct 16, 5:08=A0pm, DRN wrote: On Oct 16, 3:15=A0pm, Papa3 wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL tha= t can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. In so doing, it creates its own proprietary Security Record (G-Record). I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, so there is no purpose in a Validation DLL. - Tim Newport-Peace > Skype: specialist_systems http://www.spsys.demon.co.uk/icom.htm |
#6
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 16, 4:00*pm, Tim Newport-Peace wrote:
At 22:22 16 October 2008, Papa3 wrote: On Oct 16, 5:08=A0pm, DRN *wrote: On Oct 16, 3:15=A0pm, Papa3 *wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL tha= t can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. * SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. * *In so doing, it creates its own proprietary Security Record (G-Record). * *I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, so there is no purpose in a Validation DLL. - Tim Newport-Peace > Skype: specialist_systemshttp://www.spsys.demon.co.uk/icom.htm Eric Do you mean using SeeYou (the program on a PC) or using SeeYou Mobile on a PDA with the Garmin as a GPS/NEMA source? in which case yes there is a G record created. But since the Garmin+SeeYou Mobile combination is not an IGC approved logger there is no IGC validation program, and no point to having one. The only benefit AFAIK is those files are useful for OLC. Darryl |
#7
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 16, 7:00*pm, Tim Newport-Peace wrote:
At 22:22 16 October 2008, Papa3 wrote: On Oct 16, 5:08=A0pm, DRN *wrote: On Oct 16, 3:15=A0pm, Papa3 *wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL tha= t can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. * SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. * *In so doing, it creates its own proprietary Security Record (G-Record). * *I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, so there is no purpose in a Validation DLL. - Tim Newport-Peace > Skype: specialist_systemshttp://www.spsys.demon.co.uk/icom.htm- Hide quoted text - - Show quoted text - No Tim. SeeYou (and G72Win) have their own proprietary hashing algorithms which generate a G Record at the time of download. The process for creating the G Records is NOT compliant with the IGC private key encription methodology; however, they do prevent "casual" modification of a file downloaded by either program. So, again, back to the question, is anyone aware of a SeeYou Vali DLL? Thanks, P3 |
#8
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 16, 7:42*pm, Darryl Ramm wrote:
On Oct 16, 4:00*pm, Tim Newport-Peace wrote: At 22:22 16 October 2008, Papa3 wrote: On Oct 16, 5:08=A0pm, DRN *wrote: On Oct 16, 3:15=A0pm, Papa3 *wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL tha= t can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. * SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. * *In so doing, it creates its own proprietary Security Record (G-Record). * *I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, so there is no purpose in a Validation DLL. - Tim Newport-Peace > Skype: specialist_systemshttp://www.spsys.demon.co.uk/icom.htm Eric Do you mean using SeeYou (the program on a PC) or using SeeYou Mobile on a PDA with the Garmin as a GPS/NEMA source? in which case yes there is a G record created. But since the Garmin+SeeYou Mobile combination is not an IGC approved logger there is no IGC validation program, and no point to having one. The only benefit AFAIK is those files are useful for OLC. Darryl- Hide quoted text - - Show quoted text - This has nothing to do with the IGC or the sporting code. This relates to another initiative. P3 |
#9
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
On Oct 17, 4:22*pm, Papa3 wrote:
On Oct 16, 7:42*pm, Darryl Ramm wrote: On Oct 16, 4:00*pm, Tim Newport-Peace wrote: At 22:22 16 October 2008, Papa3 wrote: On Oct 16, 5:08=A0pm, DRN *wrote: On Oct 16, 3:15=A0pm, Papa3 *wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =A0I already have the stand alone DOS application from SeeYou; that's not what I need. =A0 I want the DLL tha= t can be launched from the Mark Ramsey validation shell application on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. * SeeYou supports downloading from non- IGC-Approved loggers, specifically Garmin. * *In so doing, it creates its own proprietary Security Record (G-Record). * *I want to see if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, so there is no purpose in a Validation DLL. - Tim Newport-Peace > Skype: specialist_systemshttp://www.spsys.demon.co.uk/icom.htm Eric Do you mean using SeeYou (the program on a PC) or using SeeYou Mobile on a PDA with the Garmin as a GPS/NEMA source? in which case yes there is a G record created. But since the Garmin+SeeYou Mobile combination is not an IGC approved logger there is no IGC validation program, and no point to having one. The only benefit AFAIK is those files are useful for OLC. Darryl- Hide quoted text - - Show quoted text - This has nothing to do with the IGC or the sporting code. *This relates to another initiative. P3 Your question may not have anything to do with the IGC but the kind of obvious answer (there is not one) does. The combination you are talking about is not an IGC approved logger or intended to be therefore unlikely anybody would create an IGC specific validation DLL for it. Darryl Darryl |
#10
|
|||
|
|||
Does SeeYou have a separate Validation DLL?
At 00:47 18 October 2008, Darryl Ramm wrote:
On Oct 17, 4:22=A0pm, Papa3 wrote: On Oct 16, 7:42=A0pm, Darryl Ramm wrote: On Oct 16, 4:00=A0pm, Tim Newport-Peace wrote: At 22:22 16 October 2008, Papa3 wrote: On Oct 16, 5:08=3DA0pm, DRN =A0wrote: On Oct 16, 3:15=3DA0pm, Papa3 =A0wrote: Folks, I know I should post this to the SeeYou forums, but I'm having issues resetting my password. I'm looking for a SeeYou DLL in the prescribed IGC format for validating the SeeYou G-Record. =3DA0I already have the stand al= one DOS application from SeeYou; that's not what I need. =3DA0 I want th= e DLL tha=3D t can be launched from the Mark Ramsey validation shell applicatio= n on the IGC website. Thanks, Erik Mann LS8-18 P3 Eric - The validation DLL is logger-specific and supplied by the logger manufacturer. So, check the IGC web site or your logger-vendor's site ? See ya, Dave "YO electric" Should have clarified further. =A0 SeeYou supports downloading from = non- IGC-Approved loggers, specifically Garmin. =A0 =A0In so doing, it cr= eates its own proprietary Security Record (G-Record). =A0 =A0I want to see= if there is a DLL which would validate files downloaded under this scenario. Cheers, P3 The security record (G-record) is generated in the Recorder for IGC-approved recorders. Garmin does not create a G-record, so there is nothing to validate, s= o there is no purpose in a Validation DLL. - Tim Newport-Peace Skype: specialist_systemshttp://www.spsys.demon.co.uk/icom.htm Eric Do you mean using SeeYou (the program on a PC) or using SeeYou Mobile on a PDA with the Garmin as a GPS/NEMA source? in which case yes there is a G record created. But since the Garmin+SeeYou Mobile combination is not an IGC approved logger there is no IGC validation program, and no point to having one. The only benefit AFAIK is those files are useful for OLC. Darryl- Hide quoted text - - Show quoted text - This has nothing to do with the IGC or the sporting code. =A0This relates to another initiative. P3 Your question may not have anything to do with the IGC but the kind of obvious answer (there is not one) does. The combination you are talking about is not an IGC approved logger or intended to be therefore unlikely anybody would create an IGC specific validation DLL for it. Darryl Actually, I believe you might be wrong there. There is a DLL to validate Garmin files downloaded with G7toWin, so it could be feasible to have a DLL for SeeYou (probably a different algorithm, so the G7toWin DLL will not work). It's just a question of someone being prepared to put in the effort. None of which will make the files IGC approved of course. Tim Newport-Peace > Skype: specialist_systems http://www.spsys.demon.co.uk/icom.htm |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OLC validation | Ken Bell | Soaring | 4 | March 1st 07 04:36 AM |
OLC validation | Ken Bell | Soaring | 0 | February 25th 07 05:21 PM |
OLC validation | Ken Bell | Soaring | 1 | February 25th 07 04:35 PM |
Seeyou NMEA to Winpilot/Seeyou | Jean | Soaring | 4 | June 3rd 06 11:38 AM |
Validation problem | Ian Cant | Soaring | 25 | December 18th 04 02:51 AM |