ATI 9600XT owners unite! :-)

Hi All

How about we all share some of our info like settings and what drivers
we are using? :-)

I just installed my 9600XT and sure would like to know what others
have their settings at.

Right now I have the drivers that came on the Asus CD. This is an
Asus 9600XT by the way. I did find drivers on the ATI site the
Catalyst 3.9's but haven't installed them. Has anyone out there
installed the 3.9 drivers?

Thanks
FaxCap

I will whenever I get mine.

Did you try it with FS2004 using the drivers on the CD?
Bill


"FaxCap" not@address wrote in message
...
Hi All

How about we all share some of our info like settings and what drivers
we are using? :-)

I just installed my 9600XT and sure would like to know what others
have their settings at.

Right now I have the drivers that came on the Asus CD. This is an
Asus 9600XT by the way. I did find drivers on the ATI site the
Catalyst 3.9's but haven't installed them. Has anyone out there
installed the 3.9 drivers?

Thanks
FaxCap

I'm using the 3.9 drivers on my 9800 pro. If you fly with FS2004 these
drivers are a must because they fixed several problems with the sim. My
resolution is 1024x768, 4XAA and 8XAF, and all runs as smooth as butter.
Looks great too.

JK

"FaxCap" not@address wrote in message
...
Hi All

How about we all share some of our info like settings and what drivers
we are using? :-)

I just installed my 9600XT and sure would like to know what others
have their settings at.

Right now I have the drivers that came on the Asus CD. This is an
Asus 9600XT by the way. I did find drivers on the ATI site the
Catalyst 3.9's but haven't installed them. Has anyone out there
installed the 3.9 drivers?

Thanks
FaxCap

On Fri, 28 Nov 2003 07:35:47 -0500, "Bill" wrote:

I will whenever I get mine.

Did you try it with FS2004 using the drivers on the CD?
Bill

Yes, FS9 and the CD drivers right now but I have the ATI 3.9 driver
sitting here.

I have the Asus version and ATI's card will be here in Vancouver
this week by the looks of it. The Asus card was $5CAN more expensive.
:-)

On Fri, 28 Nov 2003 21:02:08 GMT, "John Hall"
wrote:

I'm using the 3.9 drivers on my 9800 pro. If you fly with FS2004 these
drivers are a must because they fixed several problems with the sim. My
resolution is 1024x768, 4XAA and 8XAF, and all runs as smooth as butter.
Looks great too.

I have the 3.9's on my drive but not installed yet. I think I'll do
that later today.

This A7V motherboard only has AGPx4 do you think that will affect my
settings at all?

So AA=4X and AF=8X.....Do you have your FS9 settings at Ultra HIGH or
just HIGH?

With these CD drivers (which can be that old as the board was made
less than 6 weeks ago) I don't like the water textures at all.

FaxCap

I don't have all of my settings turned up to max. Scenery Density is a max,
aircraft textures are a max, and I have set the slider for clouds so that
they always look nice and fluffy. If you turn it down too low, the clouds
in the distance take on a 2D look. I found that there is a sweet spot in
the settings which allow for max graphics quality combined with excellent
performance. In some cases maxing out the sliders does nothing for the
scenery, but can affect performance. I'd suggest playing with it a bit
until you hit the sweet spot on your system.

JK

"FaxCap" not@address wrote in message
...
On Fri, 28 Nov 2003 21:02:08 GMT, "John Hall"
wrote:

I'm using the 3.9 drivers on my 9800 pro. If you fly with FS2004 these
drivers are a must because they fixed several problems with the sim. My
resolution is 1024x768, 4XAA and 8XAF, and all runs as smooth as butter.
Looks great too.

I have the 3.9's on my drive but not installed yet. I think I'll do
that later today.

This A7V motherboard only has AGPx4 do you think that will affect my
settings at all?

So AA=4X and AF=8X.....Do you have your FS9 settings at Ultra HIGH or
just HIGH?

With these CD drivers (which can be that old as the board was made
less than 6 weeks ago) I don't like the water textures at all.

FaxCap

On Sat, 29 Nov 2003 19:37:39 GMT, "John Hall"
wrote:

I don't have all of my settings turned up to max. Scenery Density is a max,
aircraft textures are a max, and I have set the slider for clouds so that
they always look nice and fluffy. If you turn it down too low, the clouds
in the distance take on a 2D look. I found that there is a sweet spot in
the settings which allow for max graphics quality combined with excellent
performance. In some cases maxing out the sliders does nothing for the
scenery, but can affect performance. I'd suggest playing with it a bit
until you hit the sweet spot on your system.

Hi again, John.

I am with you on the clouds....I found the same thing this morning.
I ended up using a setting that looks to be about 65%-70% area where
the clouds look very real and no performance hits.

I will try the Ultra High settings on aircraft or Scenery in the next
day or two and see what happens.

FaxCap

FaxCap not@address wrote in message . ..
Hi All

How about we all share some of our info like settings and what drivers
we are using? :-)

I just installed my 9600XT and sure would like to know what others
have their settings at.

Right now I have the drivers that came on the Asus CD. This is an
Asus 9600XT by the way. I did find drivers on the ATI site the
Catalyst 3.9's but haven't installed them. Has anyone out there
installed the 3.9 drivers?

Thanks
FaxCap

The drivers on the cd at this time is by far your best bet....I have
tried several including the new ones on the Asus website....Only the
original ones work without problems.....Hope this helps

On 17 Dec 2003 18:56:39 -0800, (Randall) wrote:

The drivers on the cd at this time is by far your best bet....I have
tried several including the new ones on the Asus website....Only the
original ones work without problems.....Hope this helps

My new 9600XT and I are settling in quite well. :-)


I have had good luck with the latest drivers on the Asus Web site.
No problems at all. I understand they are Asus tweaked 3.9 ATI
drivers. I had some problems with the ATI 3.9 but whatever Asus did
to tweak them for their cards worked great.

Well just got my ATI 9600XT and install was a breeze. The eye candy in
FS2004 is much nicer but frame rates around real clouds still quite bad. Out
side of this frame rates did improve 10 or more when clouds not around. Sort
of disappointed but I guess my P4 /1.9 is too old now.
Bill

"FaxCap" fly@noon wrote in message
...
On 17 Dec 2003 18:56:39 -0800, (Randall) wrote:

The drivers on the cd at this time is by far your best bet....I have
tried several including the new ones on the Asus website....Only the
original ones work without problems.....Hope this helps

My new 9600XT and I are settling in quite well. :-)


I have had good luck with the latest drivers on the Asus Web site.
No problems at all. I understand they are Asus tweaked 3.9 ATI
drivers. I had some problems with the ATI 3.9 but whatever Asus did
to tweak them for their cards worked great.