Has anyone gotten a response from Centrair on Pegasus parts?

I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the hinge
pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . . (bank
number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so they
can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R

tooromeo wrote:
I have sent to Emails to Centrair to get pricing info on the parts
needed
for the AD's. I received one message that described the cost for the
hinge
pins and rivets.

Mike: What did they quote on the hinge pins? (Rivets? What rivets?)

I haven't heard anything else from them about wiring money over there
to
purchase the parts. Does anyone have their wiring information . . .
(bank
number and account number) or have heard from them at all?

Last time I ordered parts from Centrair, I used an international money
order and mailed it. The most-recent wire transfer info I have is
2001-vintage and, thus, it may no longer be reliable:

CREDIT AGRICOLE CENTRE QUEST
Acct. No. 33042378531
Bank codes 19506 - 40000 Key Code 25
IBAN number FR76 1950 6400 0033 0423 7853 125, SWIFT: AGRIFRPP895

I also need to find out what the cost of the new rudder pedels are so
they
can be replaced as well.

No info here yet. Anyone else?

BravoNiner

wrote in message
oups.com...

tooromeo wrote:
I have sent to Emails to Centrair to get pricing info on the parts
needed
for the AD's. I received one message that described the cost for the
hinge
pins and rivets.

Mike: What did they quote on the hinge pins? (Rivets? What rivets?)

I haven't heard anything else from them about wiring money over there
to
purchase the parts. Does anyone have their wiring information . . .
(bank
number and account number) or have heard from them at all?

Last time I ordered parts from Centrair, I used an international money
order and mailed it. The most-recent wire transfer info I have is
2001-vintage and, thus, it may no longer be reliable:

CREDIT AGRICOLE CENTRE QUEST
Acct. No. 33042378531
Bank codes 19506 - 40000 Key Code 25
IBAN number FR76 1950 6400 0033 0423 7853 125, SWIFT: AGRIFRPP895

I also need to find out what the cost of the new rudder pedels are so
they
can be replaced as well.

No info here yet. Anyone else?

BravoNiner


Folks, US credit cards work just fine in Europe. Just ask them to charge
the parts to your MasterCard. That worked for me with Shempp-Hirth.

Bill Daniels

Hi all,

Here is the response info I got from SNCentrair


You can order hinge pins by mail.

Price is as follows :

- 1 hinge pin ref. SY991A = 7.05 euros
- 1 rivet ref. 400160 = 0.12 euros

Ex works LE BLANC

You can pay by wire transfer or euros check.

With our best regards,

SNCA


"tooromeo" wrote in message
nk.net...
I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the hinge
pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . . (bank
number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so they
can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R

Hi all,

Here is a copy of the info that I received from SNCentrair



You can order hinge pins by mail.

Price is as follows :

- 1 hinge pin ref. SY991A = 7.05 euros
- 1 rivet ref. 400160 = 0.12 euros

Ex works LE BLANC

You can pay by wire transfer or euros check.

With our best regards,

SNCA


If you hear any price on the rudder pedels please let me know. As far as I
know Centrair won't take a credit card.


Best regards,

Mike Wyman
2R





"tooromeo" wrote in message
nk.net...
I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the hinge
pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . . (bank
number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so they
can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R

By the way the rivets are used as retainers for the hinge pins so they won't
slide out of the hinge. They are drilled out to remove the hinge pins for
both the ailerons and elevator. Guess you will need them to replace the
drilled out ones.

regards,
Mike Wyman
2R
"tooromeo" wrote in message
nk.net...
I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the hinge
pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . . (bank
number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so they
can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R

I haven't pulled the bird out of the trailer yet this spring and can't
recall the number of hinges for both ailerons and the elevator for a
total pin count.

Anyone?

Thanks,

BravoNiner

Hi All,

There are 14 hinges on the wings and 6 hinges on the elevator

Mike Wyman
2R

wrote in message
oups.com...
I haven't pulled the bird out of the trailer yet this spring and can't
recall the number of hinges for both ailerons and the elevator for a
total pin count.

Anyone?

Thanks,

BravoNiner

So where does the FAA come up with "Parts cost" of $1 for the hinge pins, if
Centrair is charging 7 euros for one pin?

- 1 hinge pin ref. SY991A = 7.05 euros
- 1 rivet ref. 400160 = 0.12 euros

Ex works LE BLANC

You can pay by wire transfer or euros check.

With our best regards,

SNCA


If you hear any price on the rudder pedels please let me know. As far as
I know Centrair won't take a credit card.


Best regards,

Mike Wyman
2R





"tooromeo" wrote in message
nk.net...
I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the
hinge pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . .
(bank number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so
they can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R

I believe that they pulled that number out of a hat!!!!! Even before
Centrair came up with the pricing for the parts. Maybe the parts are made
of "Unobtainium"!!! That would elevate the price . . .


By the way has anyone considered finding out what the "heat treated
material" is for the hinge pins and replicated them here in the states?
Also does anyone have a drawing of the "Reinforced rudder pedel's? Is the
reinforcement something that we could have an A/P weld onto the existing
rudder pedel's to comply with the AD?

Just curious . . . Just in case we can't get parts quickly from Centrair.
I don't want to miss out on this season . . . 2R

regards,

Mike Wyman
2R



"Doug" wrote in message
...

So where does the FAA come up with "Parts cost" of $1 for the hinge pins,
if Centrair is charging 7 euros for one pin?

- 1 hinge pin ref. SY991A = 7.05 euros
- 1 rivet ref. 400160 = 0.12 euros

Ex works LE BLANC

You can pay by wire transfer or euros check.

With our best regards,

SNCA


If you hear any price on the rudder pedels please let me know. As far as
I know Centrair won't take a credit card.


Best regards,

Mike Wyman
2R





"tooromeo" wrote in message
nk.net...
I have sent to Emails to Centrair to get pricing info on the parts needed
for the AD's. I received one message that described the cost for the
hinge pins and rivets.
I haven't heard anything else from them about wiring money over there to
purchase the parts. Does anyone have their wiring information . . .
(bank number and account number) or have heard from them at all?

I also need to find out what the cost of the new rudder pedels are so
they can be replaced as well.

Thanks in advance for any info.

regards

Mike Wyman
Pegasus 101A0119
2R