A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Ultra Pup CG



 
 
Thread Tools Display Modes
  #1  
Old July 13th 06, 02:33 AM posted to rec.aviation.homebuilt
majduncan
external usenet poster
 
Posts: 1
Default Ultra Pup CG

Can anyone tell me what a typical cg location is for a typical ultra
pup (from the leading edge of the airfoil)?

Ads
  #2  
Old July 14th 06, 10:59 PM posted to rec.aviation.homebuilt
W
external usenet poster
 
Posts: 1
Default Ultra Pup CG


majduncan wrote:
Can anyone tell me what a typical cg location is for a typical ultra
pup (from the leading edge of the airfoil)?


Try 24 to 26 percent of the wing cord, should be safe. IIRC that is a
clark Y airfoil or something very close to it.
For instance, if the wing measures 4 feet front to back, measure 12 to
13 inches back from LE. (I am assuming this is the "Hershey Bar" wing)
Have you tried contacting the kit Mfg.? Or other builders?
Hope this helps.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Don't click if you're not ultra rich [email protected] Instrument Flight Rules 0 June 27th 05 02:20 PM
Don't click if you're not ultra rich [email protected] Piloting 8 June 24th 05 05:55 AM
Don't click if you're not ultra rich [email protected] Owning 5 June 21st 05 09:35 PM
Preceptor Ultra Pup Terry Smith Home Built 0 May 13th 04 09:18 AM
FS: Pilot Aviation Ultra S-51 Headsets Slor Aviation Marketplace 0 November 25th 03 05:31 AM


All times are GMT +1. The time now is 02:25 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 AviationBanter.
The comments are property of their posters.